RF Wireless Transmitter 433MHZ/315MHZ Module and Receiver Kit 5V DC
In stock
LKMOD00075
Rs.700.00 Rs.999.00
In stock
RF Wireless Transmitter 433MHZ/315MHZ Module and Receiver Kit 5V DC
Receiver module parameters
1.Product Model: 433/315MHZ
2.Operating voltage: DC5V
3.Quiescent Current: 4MA
4.Receiving frequency: 433.92MHZ /315Mhz (optional)
5.Receiver sensitivity:-105DB
6.Size: 30 * 14 * 7mm
7.External antenna: 32CM single core wire, wound into a spiral Technical parameters of the transmitter head 1.Product Model: MX-FS-03V
2.Launch distance :20-200 meters (different voltage, different results)
3.Operating voltage :3.5-12V
4.Dimensions: 19 * 19mm
5.Operating mode: AM
6.Transfer rate: 4KB / S
7.Transmitting power: 10mW
8.Transmitting frequency: 433Mhz /315Mhz (optional)
9.An external antenna: 25cm ordinary multi-core or single-core line
10.Pinout from left → right: (DATA; VCC; GND)
Application environment
Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3. Remark 1.VCC voltage module operating voltage and good power filtering; 2.Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm; 3.Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter.
Package Include
1 x RF Transmitter and Receiver Module 433 MHz Link Kit
VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP
Based on 0 reviews
Be the first to review “RF Wireless Transmitter 433MHZ/315MHZ Module and Receiver Kit 5V DC”
You must be logged in to post a review.
Related products
-
Electronics accessories
100m Underwater IPX8 24V 90A waterproof brushless 2-way ESC
මෙම අයිතමය අපගේ වෙබ් අඩවියෙහි Shipping from Overseas
සේවාව යටතේ ගෙන්වන බැවින් මෙය ඔබ හට ලැබීමට
වැඩ කරන දින 10 – 20 පමණ ගත වේ.
මෙම අයිතමය ඔබ ඇනවුම් කල පසු මෙහි සියලුම යාවත් කාලීන කටයුතු e-mail මගින් සිදු කෙරේ
ස්තූතියි!SKU: PREE-059 -
Display, Electronics accessories
2.4 Nextion HMI Intelligent Display Smart USART UART Serial Touch TFT LCD Module
Display, Electronics accessories2.4 Nextion HMI Intelligent Display Smart USART UART Serial Touch TFT LCD Module
Features:
- Resolution 320×240
- RGB 65K true to life colors
- TFT screen with built-in 4-wire resistive touch panel
- Easy 4-pin interface for any serial host TTL
- 4M flash memory for custom code and data application
- On-board micro-SD card for upgrade Firmware
- Visual Area: 36.72mm (L) × 48.96mm (W)
- Dimmable: 0 ~ 180 nits, 1%
- dimming interval 5V90mA Power Support
Package includes:
1 X 2.4 ” UART HMI LCD module 1 X
4P cable 1 X UB to 2pin connectorSKU: LKDIS00002 -
Electronics accessories
Ethernet W5100 Shield
LKMOD00030
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
SKU: LKMOD00030
There are no reviews yet.