DOF Robot Arm with Air Suction Servo Robotic Arm for Arduino

DOF Robot Arm with Air Pump Suction Cup Metal Digital Servo Robotic Arm for Arduino Robot UNO Competition Programmable DIY Kit

Specification:

The whole machine adopts 3 high precision and high torque digital steering gear.

Type of steering gear; KS-3620

Torque (4.8V) 15.0kg/mg

Torque (6.6V) 20.0kg/mg

Speed: 0.07s (4.8V) 10.06s (6.OV)

Operating voltage: 4.8v 6.6v DC voltage

Bearing type: ball bearing ×2

Motor type: strong magnetic high speed motor

Gear type: copper aluminum

Operating frequency: 500μs/2500hz Angle 0-180 degrees

Operating temperature: -20° C -60 ° C

Best Quality, Best Service !!!

Package List:

Robot with servo : 3 dof robot arm frame: 1 set+ 3 pcs KS-3620

Full set : 3 dof robot arm frame: 1 set+ 3 pcs KS-3620 + UNO R3 board

Title:Teaching 3 degrees of freedom air pump suction metal digital steering gear robot arm maker competition graduate support arduino

Features:

You can choose the control board package according to your needs, there are the following 3 types of control board options, you can buy more of your own needs, with control there is a gift of relevant learning materials and corresponding software, due to limited capacity there is no online technical guidance, do not understand and patience to see the learning materials do not buy, do not support the use of return please know, everything to buy with the control board package gift power. And help install and debug well.

Arduino r3 is suitable for Arduino basic developers, strong scalability, open source, and rich network data.

Pneumatic section introduction

The pneumatic part of the mechanical arm adopts the steering gear type negative pressure air pump and air relief valve, which is controlled directly by the steering gear control board without additional equipment driving, and the same code and the same program are convenient and fast. Tracheal suction cups are made of high quality silicone material. To last!

Steering gear parameters The whole machine adopts 3 high-precision and high-torque digital steering gear.

Product features Multi-function large base plate The bottom adopts multi-function large base plate, which can be used with no additional support to fix, convenient and fast. Steering type air pump exhaust valve adopts steering type vacuum air pump and exhaust valve. Convenient control is consistent with the control mode of the steering gear, no additional control board and procedures are required

High precision, excellent design, so the joints are designed with bearings, the whole machine up to 12 bearings, with the corresponding gasket to make the gap fine, so that its operation is more smooth and stable, greatly improve the accuracy, no-load repeated movement return accuracy error control within 1mm.

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP