Variable Frequency Drive VFD Single phase Input To Three phase Output AE200H-2-1PH-0.75G-1.5P

Single-Phase Input → Three-Phase Output

Model: AE200H-2-1PH-0.75G-1.5P

Electrical Specifications

• Model: AE200H-2-1PH-0.75G-1.5P

• Input Voltage: Single-phase AC 220–240 V ±15%

• Input Frequency: 50 / 60 Hz

• Output Voltage: 380V

• Rated Motor Power: 0.75 kW

• Rated Output Current: Approximately 4–5 A (typical for 0.75 kW drives)

• Output Frequency Range: 0.00 Hz to 600 Hz

• Control Methods:

  • V/F control

  • Sensor-less Vector Control (SVC)

• Overload Capacity:

  • 150% of rated current for 60 seconds

  • 180% short-time peak

Features

• Soft start / soft stop

• Adjustable acceleration and deceleration time

• Automatic voltage regulation

• Torque boost (manual and automatic)

• Built-in simple PLC function (multi-step speed)

• Built-in protection:

  • Over-voltage

  • Under-voltage

  • Over-current

  • Over-load

  • Over-temperature

  • Short-circuit protection

• Fault history record

• PWM output for smooth motor control

• Energy-saving operation mode

Control & Interface

• Digital keypad with LCD display

• Forward / Reverse control

• Multiple digital input terminals

• Analog input (0–10 V or 4–20 mA, depending on model)

• Relay or open-collector output for status feedback

• Parameter lock and password protection

Environmental Conditions

• Operating Temperature: –10°C to +50°C

• Storage Temperature: –20°C to +60°C

• Humidity: <95% (non-condensing)

• Cooling Method: Forced-air cooling

• Installation Orientation: Vertical mounting, well-ventilated area

Mechanical Specifications

• Input Terminals: L / N (single-phase)

• Output Terminals: U / V / W (three-phase motor output)

• Ground: Dedicated grounding terminal

• Enclosure Rating: IP20 (standard for AE200H series)

• Approximate Size (0.75 kW model): 150–170 mm height, 100–110 mm width, 130–150 mm depth

• Approximate Weight: 1.0–1.4 kg

Applications

Suitable for any small three-phase induction motor up to 0.75 kW, especially in locations where only a single-phase supply is available:

• Water pumps and mini-pumps

• Small fans and blowers

• Small conveyors

• Light workshop machinery (mini lathe, small milling machine, drill press)

• Mixers and small industrial equipment