Stoke Length 100MM 20MM/S 450N DC6V-24V Nema17 Stepper Electric Push Rod

Specifications

1. Model: Electric Push Rod Actuator with NEMA17 Stepper Motor
2. Stroke Length: 100mm (customizable on request)
3. Speed: 20mm/s
4. Rated Force (Push/Pull): 450 Newtons (N)
5. Input Voltage: DC6V-24V
6. Motor Type: NEMA17 Stepper Motor
7. Drive Mechanism: Lead screw drive (commonly Trapezoidal Thread)
8. Repeatability: ±0.05mm
9. Mounting Configuration:
   • Front and Rear Clevis (Standard)
   • Optional Mounting Brackets

Mechanical Specifications

1. Actuator Structure:
   • Aluminum Alloy Housing (Lightweight and Corrosion Resistant)
   • Stainless Steel Lead Screw and Push Rod Shaft
2. Step Angle: 1.8° (200 steps per revolution)
3. Lead Screw Pitch: Commonly 2mm or 4mm depending on travel speed and resolution requirements
4. Static Load-Holding: 450N (without power to motor)
5. Duty Cycle: 20-30% (Continuous usage at max load will affect lifespan)
6. Ingress Protection (IP Rating): IP54 (Dust and Light Water Splash Protection)
7. Backlash: ≤ 0.05mm

Electrical Specifications

1. Input Voltage: DC6V to 24V
2. Current per Phase: 1.5A to 2A (Varies by Motor Model)
3. Wiring Configuration: 4-wire Bipolar Stepper Motor
   • Color Coding (Standard): Red, Green, Yellow, Blue
4. Torque (Holding): Approx. 40-60 N·cm (Varies by Stepper Motor Specs)
5. Control Compatibility:
   • Stepper Motor Drivers (e.g., A4988, DRV8825, TMC2209)
   • Microcontrollers (Arduino, Raspberry Pi, PLCs)

Performance Specifications

1. Speed Range: Adjustable via stepper motor driver or pulse signal
2. Resolution: Depends on driver micro-stepping settings
   • Example: 1mm per revolution with 200 steps = 0.005mm per step
3. Acceleration/Deceleration: Programmable via motor driver or controller
4. Noise Level: ≤ 55dB under normal operating conditions

Environmental Conditions

1. Operating Temperature: -10°C to +50°C
2. Storage Temperature: -20°C to +70°C
3. Relative Humidity: 10% to 85% (non-condensing)

Applications

1. Precision Motion Control Applications
2. Automation Equipment
3. Linear Positioning Systems
4. Robotics and CNC Machines
5. Medical Devices
6. Industrial Automation