Round Shaft 775 High-Speed High Torque Dual Shaft DC Motor 12V 6000RPM | 12V 10000RPM | 12V 12000RPM | 24V 10000RPM

Round Shaft 775 High-Speed High Torque Dual Shaft DC Motor

The 775 Dual Shaft Motor is popular in various DIY and industrial applications due to its high speed and torque.

Specifications:

• Motor Type: Brushed DC Motor
• Shaft Type: Dual Shaft (can have both front and rear shafts)
• Shaft Diameter: 5 mm (can vary slightly)
• Motor Body Diameter: 42 mm (standard 775 motor size)
• Motor Length: Approximately 70 mm
• Mounting Hole Distance: 30 mm (approximately)

Electrical Specifications:

• Voltage Range: 6V to 24V DC (can vary by model)
• Nominal Voltage: 12V or 24V DC (commonly used voltages)
• No-Load Speed (12V): 8,000 – 12,000 RPM (can vary)
• No-Load Speed (24V): 16,000 – 24,000 RPM (can vary)
• Stall Current (12V): 6A to 10A (approximate)
• Stall Torque (12V): Around 1.2 Nm or higher

Mechanical Specifications:

• Output Shaft Length: Typically around 18 – 20 mm (can vary)
• Shaft Type: Round (with or without a flat side for set screws)
• Bearing Type: Ball bearings or sleeve bearings
• Rotation: CW/CCW (clockwise and counterclockwise)

Performance:

• Rated Torque: High torque, capable of handling moderate to heavy loads depending on the voltage
• Efficiency: Generally high for brushed motors
• Cooling: Usually air-cooled, with vent holes at the back

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP