LK-Tronics > Products > I/O expansion unit FX2N-32ER-ES/UL

I/O expansion unit FX2N-32ER-ES/UL

Sold By : LK-Tronics SKU: FX2N-32ER-ES/UL Category: Tags: , ,

මෙම අයිතමය අපගේ වෙබ් අඩවියෙහි Shipping from Overseas
සේවාව යටතේ ගෙන්වන බැවින් මෙය ඔබ හට ලැබීමට
වැඩ කරන දින 10 – 20 පමණ ගත වේ.
මෙම අයිතමය ඔබ ඇනවුම් කල පසු මෙහි සියලුම යාවත් කාලීන කටයුතු e-mail මගින් සිදු කෙරේ
ස්තූතියි!

or make 3 interest free instalments of රු.26,333.33 with Koko

රු79,000.00

Add to Wishlist
Add to Wishlist

Description

I/O expansion unit FX2N-32ER-ES/UL

  • Manufacturer : Mitsubishi Electric
  • FX2N-32ER-ES/UL
  • I / O expansion unit FX2N – 32ER – ES / UL
  • Application sequencer : FX1N, FX3G, FX2N, FX3U
  • mass : 0.65 Kg
  • Rated voltage : AC 100 V to 240 V
  • Voltage tolerance range : AC 85V ~ 264V
  • Rated frequency : 50/60 Hz
  • Power supply fuse : 250 V 3.15 A (3A)
  • Inrush current : AC 100 V: maximum 40 A 5 ms or less AC 200 V: maximum 60 A 5 ms or less
  • power consumption : 30 W
  • 24 VDC service power supply : 24 VDC 250 mA or less When input / output expansion block is connected, 24 VDC service power is consumed.
  • Input specification :
  • Number of input points : 16 points
  • Input connection shape : Removable terminal block (M3 screw)
  • Input format : Sink / source
  • Input signal voltage : DC 24 V ± 10%
  • Input impedance : 4.3 kΩ
  • Input signal current : 5 mA / 24 VDC
  • Input ON sensitivity current : 3.5 mA or more
  • Input OFF sensitivity current : 1.5 mA or less
  • Input response time : About 10 ms
  • Input signal format : Sink: no-voltage contact input or NPN open collector transistor source: no-voltage contact input or PNP open collector transistor
  • Input circuit insulation : Photocoupler insulation
  • Input operation display : LED on the panel when input is ON
  • Number of output points : 16 points
  • Output connection shape : Removable terminal block (M3 screw)
  • Output type / format : relay
  • External power supply : DC 30 V or less AC 240 V or less (When not compliant with CE, UL, cUL standard, AC 250 V or less)
  • Maximum load Resistive load : Please set the total load current per 2A / 1 point common as follows. . Output 4 points / common: 8 A or less
  • Inductive load : 80VA
  • Minimum load : DC 5 V 2 mA (reference value)
  • Response time OFF → ON : About 10 ms
  • ON → OFF : About 10 ms
  • Circuit insulation : Mechanical insulation
  • Output operation indication : LED lit when relay coil is energized
  • Ambient temperature : 0 to 55 ° C. … Operating -25 to 75 ° C. ….. Save
  • Relative humidity : 5 to 95% RH (noncondensing)…. in operation
  • Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
  • Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2
  • Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
  • Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
  • Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
  • Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si
  • tor with period of 30 to 100 Hz
  • Withstand voltage : Between the power supply terminal (AC power supply) and the earth terminal: AC 1500 V for 1 minute 24 VDC Service power supply and between the input terminal (24 VDC) and the earth terminal: 500 V AC for 1 minute Between the output terminal (relay)
  • Insulation resistance : Between each terminal and earth terminal: 500 MV DC 500 MΩ or more with an insulation resistance meter
  • ground : Class D grounding (grounding resistance: 100 Ω or less)Grounding should be dedicated ground or common ground.
  • Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
  • Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.
  • Shipping Weight : 1.7 Kg

Brand

Mitshubishi Electric

Established in 1977, Mitsubishi Electric Asia has been offering reliable, high-performance products and services ranging from home electronics, industrial and factory automation, space systems, public utility systems and semiconductors to homes, businesses and industries in Asia Pacific.

Customer Reviews

Customer Rating

රු79,000.00
0
0 Ratings
Stars 5
(0)
Stars 4
(0)
Stars 3
(0)
Stars 2
(0)
Stars 1
(0)

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Vendor Information

  • 5.00 5.00 rating from 7 reviews
Item added To cart
X