Stoke Length 50MM 10MM/S 500N DC6V-24V Nema17 Stepper Electric Push Rod
Specification for Electric Push Rod (Linear Actuator)
1. General Information
- Type: NEMA17 Stepper Motor Integrated Electric Push Rod (Linear Actuator)
- Stroke Length: 50 mm
- Push/Pull Force: 500 N (50 kg)
- Speed: 10 mm/s
- Voltage Input: DC 6V to 24V
2. Stepper Motor Parameters (NEMA 17)
- Motor Type: Bipolar Stepper Motor
- Step Angle: 1.8° (200 steps per revolution)
- Rated Voltage: 6V to 24V (compatible with various drivers)
- Current Per Phase: 1.2A to 2.0A (based on application)
- Holding Torque: Approximately 40 – 45 N·cm
- Phase Resistance: 1.5 to 2.0 ohms
- Inductance: 2.5 to 4.0 mH
3. Linear Actuator Parameters
- Stroke Length: 50 mm
- Push/Pull Force: 500 N (maximum)
- Travel Speed: 10 mm/s (under no load, may vary slightly with load)
- Lead Screw Type: Trapezoidal Thread (e.g., T8x2 or T8x4)
- Screw Lead: 2 mm to 4 mm per revolution
- Backlash: ≤ 0.05 mm
- Self-locking: Yes, due to lead screw design
4. Mechanical Properties
- Material:
- Push Rod: Stainless Steel or Aluminum Alloy
- Housing: Anodized Aluminum Alloy
- Maximum Load: 500 N
- Mounting Bracket Options: Front and rear clevis brackets (standard)
- Duty Cycle: 20% (maximum 2 minutes continuous operation within 10 minutes)
- Noise Level: ≤ 55 dB (at 1 meter distance)
- Life Span: 100,000 cycles under rated load
5. Electrical Properties
- Current Draw: Varies with load and voltage (typical range: 1.5A to 3A)
- Drive Type: Microstepping Driver (recommended for smooth operation)
- Control Mode: Step and Direction Signals (pulse-based control)
6. Environmental Specifications
- Operating Temperature: -10°C to 50°C
- Storage Temperature: -20°C to 60°C
- Protection Level: IP54 (standard) / Optional IP65 for dust and water resistance
- Vibration Resistance: Complies with IEC 60068-2-6
7. Applications
- CNC Machines
- Robotics
- Precision Automation Systems
- Adjustable Mechanisms
- Laboratory and Medical Equipment
- Linear Motion Systems
8. Dimensions
- Motor Size: NEMA 17 (42 mm x 42 mm)
- Overall Length: Varies based on stroke and configuration (~150 mm to 200 mm)
- Mounting Interface: 4 x M3 or M4 holes at NEMA 17 faceplate
- Rod Diameter: 8 mm (typical)
- End Connectors:
- Standard Clevis Mount
- Threaded Rod End (optional)
There are no reviews yet.