L298N Motor Driver Module

L298N Motor Driver Module – Dual H Bridge DC Stepper

The L298N Motor Driver Module is a high-performance device designed to control DC motors with ease. It features a dual H-bridge configuration, allowing for bi-directional control of two motors simultaneously. With a maximum output current of 2A per channel, this module is ideal for a wide range of applications, including robotics, automation, and more.

1 Driver chip: new L298N dual H-bridge DC motor drive chip

2 Driving part of the terminal power supply range Vs: 5~35V ; if the need for the board to take electricity, the power supply range  Vs:7~35V

3 Driving part of the peak current Io: 2A

4 Logic part of the terminal power supply range Vss: 5~7V (can be used for the board  + 5V)

5 Logical part of the working current range: 0 ~ 36mA

6 Control signal input voltage range:

Low level: －0.3≤Vin≤1.5V

High level: 2.3V≤Vin≤Vss

7 Enable signal input voltage range:

Low level: -0.3≤Vin≤1.5V (control signal.)

High level: 2.3V≤Vin≤Vss(effective control signal)

8 Maximum power consumption: 20W

9 Storage temperature: -25~130’C

10 Driver board size: 53mm x 43mm

11 Drive weight: 35g

Product features:

This module USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.

Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.

This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP