200x120x75mm IP65 ABS Plastic Mount Enclosure Box

• Model Dimensions: 200mm (L) x 120mm (W) x 75mm (H)
• Ingress Protection: IP65-rated (dust-tight and water-resistant)
• Material: Acrylonitrile Butadiene Styrene (ABS) Plastic
• Mounting Type: Wall-mountable

Physical Dimensions

1. External Dimensions:
   • Length: 200mm
   • Width: 120mm
   • Height: 75mm
2. Internal Dimensions:
   • Length: 192mm
   • Width: 112mm
   • Height: 69mm (accounting for lid thickness and gasket seal)
3. Wall Thickness:
   • Average thickness: 3mm for enhanced durability.

Material Details

• Material Composition: High-quality ABS plastic.
• Thermal Resistance:
  • Operating temperature: -20°C to 85°C.
  • Flammability rating: UL94-HB.
• UV Resistance: Suitable for limited outdoor use; prolonged UV exposure may cause discoloration.
• Impact Resistance:
  • Tested for IK08 mechanical impact.

Ingress Protection (IP65)

• Dust Resistance: Fully protected against dust entry.
• Water Resistance: Resists low-pressure water jets from all directions (tested to IEC 60529 standards).

Mechanical Features

1. Lid Design:
   • Hinged or detachable flat lid.
   • Includes silicone gasket for a tight seal.
   • Screw fasteners: Stainless steel, corrosion-resistant.
2. Mounting Options:
   • Wall-mounting: Pre-molded screw holes for quick installation.
   • Panel-mounting: Optional DIN rail compatibility.
3. Cable Management:
   • Optional knockouts or gland entry points (depending on model variation).
   • Smooth, drillable surfaces for custom cable entries.
4. Surface Finish: Matte finish for a professional appearance and scratch resistance.

Electrical & Environmental Specifications

• Electromagnetic Shielding: Not shielded (can accommodate optional EMI coatings).
• Dielectric Strength: Suitable for low-voltage applications.
• Chemical Resistance: Moderate resistance to oils, grease, and weak acids/alkalis.

Applications

• Industries:
  • Industrial control systems.
  • Electrical junction boxes.
  • Network and communication hubs.
• Use Cases:
  • Housing for circuit boards or controllers.
  • Outdoor/indoor switchgear protection.
  • Sensor or telemetry device enclosures.