.8G 40CH Dual Antennas FPV Goggles Monitor Video Glasses Headset HD W/ 25mW transmitter fpv camera Osd for Racing Drone

The 5.8G 40CH Dual Antennas FPV Goggles Monitor is a high-quality product designed for immersive and real-time First Person View (FPV) experiences. With its dual antennas, it ensures a stable and reliable signal reception, allowing you to enjoy uninterrupted video transmission.

Description

 

Double Antennas

Built-in 3.7V 1200mAh Battery

Support a key search frequency

RaceBand 40 channel Auto-Searching

Real-time video return 5.8G FPV Receiver

● Small size and light weight;

● Low power consumption, Working current 300~330mA;

● Double antenna reception to make the signal more stable;

● RaceBand 40 channel, Auto-Searching;

● 3.0 Inch 480*320 dot high brightness LCD screen;

● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;

● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;

● Universal USB charging interface;

● Real-time video return, Very low time-delay;

● Bilingual menu in support of Chinese and English;

● Support external video signal input;

● Support AV signal output (Connect external DVR);

①Key 1: Short press for MENU mode; Long press (More than 3 sec) for Power ON/OFF.

②Key 2: Short press for Auto-Searching (Automatic selection of the strongest channel).

③Key 3: Short press for Band+ (Change bands A-B-E-F-R circularly).

④Key 4: Short press for Channel+ (Change channels 1-2-3-4-5-6-7-8 circularly).

⑤Eye ring: protect the surrounding parts of the eyes, so that the wear more comfortable.

⑥Micro-USB Charging port: Supports DC5V only.

⑦ Antenna port A: RP-SMA male.

⑧Charging indicator: Red light when charging light; full power, the indicator goes off.

⑨Antenna port B: RP-SMA male.

⑩AV Jack: In RF receiving mode can output AV signal; In AV mode can enter the video signal.

⑪Head band: Adjustable headband.

Menu Operation Instructions:

 In normal mode, press Key 1 to enter the MENU mode.

In MENU mode:

①Key 1: Select the option bar.

②Key 2: Return to normal mode.

③Key 3: Value -.

④Key 4: Value +.

AV port Instructions:

Dimension Diagram:

Not included antennas and headband.

Safety instruction:

1. Read the entire instruction manual to become familiar with the features of the product before operating.

2. Age Recommendation: Over 14 years old. Using any near eye displays on children under 14 can cause eye development problems. This is not a toy.

3. Please avoid wet or humid environments.

4. Please use standard USB charger, charging voltage can only be 5V.

5. AV output and Video input cannot work at the same time, It is forbidden to insert external video in RF receiving mode.

FPV Camera

• Sensor: 1/4 “CMOS
  
• Lens: M8 800TVL Lens
  
• Angle: 150 ° FOV horizontal viewing angle of 170 ° DFOV diagonal perspective
  
• Format: NTSC / PAL (switchable)
  
• Power consumption: 380mA @ 3 · 7V
  
• Power: 3.6-5.5V
  
• Lens Mirror Diameter: 2.1mm IR coated FOV150 (horizontal)

Video Transmitter

• Support video format: NTSC / PAL
  
• Output Impedance: 75 Ohm
  
• Output signal strength: 23 ~ 24dBm
  
• Output Power: 25mW
  
• Wireless Channel: 40CH
  
• Antenna: RHCP circular polarization clover leaf antenna
  
• Operating voltage: 3.6V ~ 5.5V
  
• Current: 100mA
  
• Audio carrier: 6.5MHz

Button function

• Short press (Apr. 1 sec or less): Change channels 1-8
  
• Long press (More than 1.5 sec): Change bands A-B-E-F-R
  
• Long + press (More than 3 sec): Change NTSC/PAL system
  
• NTSC or PAL (selectable; Blue LED on= NTSC; Blue LED off=PAL)

Body

Weight: 3.6g
Size: 18x16x16mm (without antenna)

Feature:

AIO FPV camera, transmitter , antenna all 3 functions in one limit size and weight
150 ° FOV horizontal viewing angle of 170 ° DFOV diagonal perspective
Five bands 40 channels with Race band

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

5.8G 40CH Dual Antennas FPV Goggles Monitor
lahiru Dhananjaya

RC Tank Chassis Intelligent Trolley Crawler Chassis for Arduino/Raspberry Robot Car Shock Absorption Programmable Robot DIY Kit

Features:

New enhanced version of the obstacle tank chassis product description: Enhanced version of the obstacle tank chassis, the chassis fuselage and wheel train structure are made of all metal, exquisite and beautiful, solid and stable, four all-metal gearbox motor traction, powerful, can go backwards, can turn left and right, etc. and the operation is smooth and smooth; It is worth mentioning that the front and back parts of the chassis support can be freely moved, according to the Angle of the car to adjust the overall balance of the chassis, flexible operation, while the middle of the fuselage is also reserved for a steering gear installation port to provide convenience for customers to install the steering gear, the entire chassis platform is wide, providing enough space for customers to install the control circuit.

Parameters:

Approximate size: 393mm*206mm*84mm (length * width * height) different batches, sometimes the size will be small change motor operating voltage: 6 to 12V (12V speed more than 350 revolutions per minute) Chassis platform can be installed all arms produced by the company

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

RC Tank Chassis Trolley Crawler for Arduino Raspberry
lahiru Dhananjaya

Robotic Arm for Smart Car Competition for Arduino Kids DIY

Feature:

• Color grab
• Ultrasonic following
• Distance grab
• Intelligent tracking
• Tracking + obstacle avoidance
• Tracking + color recognition grab
• Tracking + distance grab
• Free obstacle avoidance
• Voice control clip
• Android phone App control
• PS2 controller control

Specification:

• Control board:51 control board
• Main control chip:AP 15W4K61S4
• Source code:All open source
• PWM steering engine:6 ports (overcurrent protection)
• Bus steering gear:Two independent interfaces
• Control mode:Handset/mobile APP
• Code programming:support
• Bluetooth 4.0:support
• Extension interface:There are
• Low pressure alarm:support

Control board：

• STM32 control board
• Main control chip:STM32F103C8T6
• Source code:All open source
• PWM steering gear:6 ports (overcurrent protection)
• Bus steering gear
• Two independent interfaces
• Control mode
• Handset/mobile APP
• Code programming:support
• Bluetooth 4.0:support
• Extension interface:There are
• Low pressure alarm:support

Control board：

• Arduino control board
• Main control chip:AT Mega328(uno)
• Source code:All open source
• PWM steering gear:6 ports (overcurrent protection)
• Bus steering gear
• Two independent interfaces
• Control mode:Handset/mobile APP
• Code programming:support
• Bluetooth 4.0:support
• Extension interface”There are
• Low pressure alarm”support

The list:

Luxury configuration

• Metal body:1 set
• 6 degrees of freedom mechanical arm support：1 set
• 51/Arduino/STM32 control board：3 choose 1
• USB data cable：1 root
• Digital steering gear:5
• Burn Resistant Steering Gear (Claw):1 piece
• Dc reduction motor:2

Recommended 7.4V lithium battery  （Shipping without batteries, due to Logistics policy）

• Charger：1 piece
• PS2 Gamepad：1 piece
• Bluetooth 4.0 module：1 piece
• Android phone APP：1 set
• Complete set of data：1 set
• Ultrasonic sensor:1 piece
• Color recognition sensor：1 piece
• Line sensor：1 piece
• Sound sensor:1 piece

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Robotic Arm For Smart Car Competition For Arduino Kids DIY
lahiru Dhananjaya

Robotics Kit Educational RC Robot with Ps2 Remote Control Programmable Diy Kit Stem Kit 17 Dof Bionic Robot School Competition

Youfang Smart is smarter, tech, and healthier

We are the sales No.1 in the toy industry, specializing in the development of science and technology, technology, education and teaching enterprises. This programmable roboticis a new, very intelligent teaching programmable roboticdesigned by our institute, but also the enlightenment of children and engineers to learn education, we will release more technology, education, health new products from time to time, can be used as children’s toy gifts, adult learning programmable board.I believe you will like our robot.

By the way, if you like our store, Please add our store to your Favorite Stores, You can get our New arrival and Discount information in time.

Stem Kit 17 Dof Bionic Robot School Competition Robotics Kit Educational RC Robot with Ps2 Remote Control Programmable Diy Kit

Features:

Forward/backward

defense

Left jump

Right jump

Left lift

Right side lift

Forward stand

Backstand

Support handle remote control and mobile phone small program remote control two control methods small program without downloading and installing any program

Specification:

Product name: 24 way steering gear control board

Dimensions: 72mm*50mm

Bus steering gear interface: 6 lines (each line can create 6)

Product weight:26g

Hole size: 64mm-42mm

Store action: 10000+

Power supply voltage: 6-8.4VPWM

Steering gear interface: 24

PS2 Gamepad support

Bluetooth module support

Infrared remote control support

MP3 voice module support

WiFi camera module support

Low voltage alarm support

Offline operation support

On-line debugging support

Steering gear anti-reverse connection support

Secondary development support

Manual offline programming support

Independent power supply support for steering gear

USB driver free support

Detailed information provision

Provided by wechat mini program

Computer upper computer software provided

Model COSIN

The type of steering gear is greater than or equal to 30KG digital bus steering gear

Battery power supply 7.4V2600MA

Product weight 2.26kg (including lithium battery)

The legs of 17 degrees of freedom use a 4-joint linkage structure

Debugging Mode Wireless debugging or wired debugging

Support type 5052 Aluminum alloy + carbon fiber +3D nylon + Custom nylon + Teflon

The control mode is mainly controlled by PS2 controller, but also can be controlled by computer or mobile phone

Fighting skills: Left hook, right hook, left lift, Right lift, front roll kick (the kill)

Programming mode Graphic programming, can control the movement time of a single steering gear

Dimensions Height 450mm shoulder width 104mm maximum thickness 125mm Feet size 75mm*125mm

Serial control of steering gear control, only need to send character command control, support steering gear Angle back read, with locked-rotor protection temperature protection, can support conversion into motor mode

Controller bus controller, support 6 groups of bus steering gear interface, 24 conventional PWM steering gear interface can simultaneously connect hand, wireless synchronization module, Bluetooth module

Package list:

ZLink module

Synchronous band antenna

USB data cable

Spare battery

Charger

Pair cable 20cm

Handle

No.7 battery
for Ps2 handle (shipping without this battery)

Professional aluminium box

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Robotics Kit Educational RC Robot with Ps2 Remote Control Programmable Diy Kit
lahiru Dhananjaya

MG996R Metal Gear High Torque Servo Motor

Mechanical Arm Robot Car Learning Starter Kit W/PS2 Contoller for Arduino Robot/Support Android &IOS

MG996R Metal Gear High Torque Servo Motor

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Robot Manipulator Metal Alloy Mechanical Arm Clamp Claw Kit MG996R
lahiru Dhananjaya

Omni Directional Wheel Robot Car Chassis 58mm

Features：

The omni-directional movement can be realized by using the omnidirectional wheel technology of the three wheel drive omnidirectional wheel platform. It includes vertical movement and horizontal movement. The main part of the car consists of the motor and the omnidirectional wheel. The double layer triangular platform, free to increase the number of layers, can provide more space, such as controllers, sensors, cameras and other electronic devices. Suitable for user DIY, a very good Omni omnidirectional wheel car learning chassis!

The two package is divided into Holzer encoder and photoelectric encoder. It only has the same speed accuracy. The other parts are exactly the same. They need high accuracy. Please choose the 360 line photoelectric encoder.

In general, you can use the 13 wire Holzer speed measurement. The 360 line and the 13 line are the original speed measurement precision, the output pulse number = the number of the original line * reduction ratio!

Omni Directional Wheel Robot Car 58mm
lahiru Dhananjaya

mBot Educational Robot Kit

Description

mBot Educational Robot Kit
lahiru Dhananjaya