Optical Infrared Water Liquid Level Sensor with Module

Specifications

Optical Sensor Characteristics

• Detection Range: 0–100 mm (customizable per application)
• Wavelength: 850–950 nm (infrared light)
• Material: Polycarbonate or Glass (optical head)
• Light Source: Infrared LED
• Detection Accuracy: ±1 mm
• Viewing Angle: ≤15°

Electrical Parameters

• Operating Voltage: 5 VDC
• Current Consumption: ≤15 mA
• Signal Output:
  • Type: Digital (High/Low) or Analog (0–5 V/4–20 mA)
  • Interface: GPIO Analog
• Response Time: <10 ms

Environmental Parameters

• Operating Temperature: -20°C to 85°C
• Storage Temperature: -40°C to 100°C
• Relative Humidity: 0–95% (non-condensing)
• Ingress Protection: IP67 or IP68 (water and dust resistant)

Module Specifications

• Dimensions: 30 x 20 x 10 mm (module size)
• Weight: 20–50 grams
• Mounting Options: Screw holes or adhesive pads
• Communication: Built-in signal amplifier and processing module

Supported Liquids

• Compatibility: Water (distilled, tap, etc.), oils, alcohol, and non-corrosive chemicals.
• Non-Compatible Liquids: Highly reflective or opaque liquids (consult the manufacturer for details).

Applications:

• Industrial: Tank level monitoring, fluid dispensers, and chemical processing.
• Medical: IV fluid monitoring, laboratory equipment, and sterilizers.
• Automotive: Coolant, oil, and washer fluid detection.
• Consumer: Water cleaners, coffee machines, and home appliances.

Optical Infrared Water Liquid Level Sensor with Module
darazsales

Original Meanwell NDR 120 / 240 /480 Series 24V DC Single Output Industrial DIN Rail Power Supply

Specifications

• Brand: MeanWell
• Series: NDR
• Type: Single Output Industrial DIN Rail Power Supply
• Input Voltage Range:
  • Universal AC Input: 90 ~ 264VAC
  • DC Input: 127 ~ 370VDC
• Efficiency: Up to 91-94% (depending on model)
• Output Voltage: 24V DC (adjustable ±10% via potentiometer)
• Protection: Short circuit, Overload, Overvoltage, Overtemperature
• Cooling: Convection cooled
• Mounting: DIN Rail (TS-35/7.5 or TS-35/15)
• Ambient Operating Temperature: -20°C to +70°C
• Humidity: 20% to 95% RH non-condensing
• Insulation Class: I
• Safety Standards:
  • UL508, EN62368-1 (for industrial control equipment)
  • EN55032 Class B for EMC compliance
  • RoHS Compliance
• LED Indicator: For power on (Green LED)
• Dimensions and Weight: Varies by model, listed below.

2. Model-Specific Specifications

2.1. MeanWell NDR-120-24

• Output Power: 120W
• Output Voltage: 24V DC
• Output Current: 5A
• Input Voltage Range:
  • 90 ~ 264VAC
  • 127 ~ 370VDC
• Efficiency: Up to 91%
• Ripple & Noise: ≤120mVp-p
• Overload Protection: 105% ~ 150% of rated load
• Dimensions (W x H x D): 40 x 125.2 x 113.5mm
• Weight: 600g

2.2. MeanWell NDR-240-24

• Output Power: 240W
• Output Voltage: 24V DC
• Output Current: 10A
• Input Voltage Range:
  • 90 ~ 264VAC
  • 127 ~ 370VDC
• Efficiency: Up to 93%
• Ripple & Noise: ≤120mVp-p
• Overload Protection: 105% ~ 150% of rated load
• Dimensions (W x H x D): 63 x 125.2 x 113.5mm
• Weight: 900g

2.3. MeanWell NDR-480-24

• Output Power: 480W
• Output Voltage: 24V DC
• Output Current: 20A
• Input Voltage Range:
  • 90 ~ 264VAC
  • 127 ~ 370VDC
• Efficiency: Up to 94%
• Ripple & Noise: ≤150mVp-p
• Overload Protection: 105% ~ 150% of rated load
• Dimensions (W x H x D): 85.5 x 125.2 x 128.5mm
• Weight: 1300g

3. Protection Features (Common to All Models)

• Short Circuit Protection: Auto recovery after fault condition is removed.
• Overload Protection: 105% ~ 150% of rated load with constant current limiting and auto recovery.
• Overvoltage Protection: 28 ~ 36V DC, with shutdown and latch-off.
• Overtemperature Protection: Shutdown with auto recovery after cooling.

4. Additional Specifications (All Models)

• Hold-up Time: ≥16ms at full load and 230VAC input
• Rise Time: ≤60ms at 230VAC input
• Power Factor Correction (PFC): No PFC required (due to power rating and efficiency)
• MTBF: >500,000 hours per MIL-HDBK-217F
• Vibration Resistance: 10 ~ 500Hz, 2G 10min/1 cycle, period for 60 min each along X, Y, Z axes

5. Applications

• Industrial automation
• Factory automation
• Building automation
• Mechanical equipment
• Instrumentation and control systems

Original MeanWell NDR 120 / 240 /480 Series 24V DC Single Output Industrial DIN Rail Power Supply
darazsales

GC-070-24M-C Samkoon DC 24V Integrated PLC & 4.3inch 480*272 HMI

The Samkoon GC-070-24M-C combines a Programmable Logic Controller (PLC) and a 7-inch Human-Machine Interface (HMI) into a single, compact unit. Designed for industrial applications, it features a high-resolution touch screen, multiple digital inputs and outputs, and supports various communication protocols, including Modbus RTU. Its robust construction and user-friendly interface make it ideal for streamlining automation processes

Specifications

• Model: GC-070-24M-C
• Brand: Samkoon
• Type: Integrated PLC (Programmable Logic Controller) with HMI (Human-Machine Interface)
• Display Size: 4.3-inch
• Display Resolution: 480 x 272 pixels
• Input Voltage: DC 24V

PLC Specifications:

• PLC Type: Integrated
• CPU Frequency: 168MHz
• Program Memory: 64KB
• Data Memory: 4KB
• Expansion: Supports I/O expansion modules
• Input Points: 14 DI (Digital Inputs)
• Output Points: 10 DO (Digital Outputs)
• Input Voltage Type: 24VDC for digital inputs
• Output Type: Relay or Transistor (based on variant)
• High-speed Counter: 6 channels (100kHz) for high-speed pulse inputs
• Pulse Output: 2 channels (100kHz) for high-speed pulse outputs
• Communication Ports:
  • RS232
  • RS485 (Modbus RTU supported)
  • USB programming interface
• Communication Protocols: Modbus RTU, free protocol, and custom protocols supported.

HMI Specifications:

• Display Size: 4.3 inches
• Display Resolution: 480 x 272 pixels
• Touch Panel: Resistive touch
• Color Depth: 65K colors
• Brightness: Adjustable
• Storage Capacity: 128MB
• Data Logging: Supported
• Historical Data: Can log and save up to 128MB of historical data
• Communication Ports: RS232, RS485, and Ethernet options depending on the model
• Programming Software: SamDraw for HMI, Ladder diagram for PLC
• Other Features:
  • Real-time monitoring
  • Alarm function with historical alarm log
  • Trend graph for monitoring data

Environmental Specifications:

• Operating Temperature: -10°C to 60°C
• Storage Temperature: -20°C to 70°C
• Operating Humidity: 10-90% (non-condensing)
• Vibration Resistance: 10-25Hz (X, Y, Z axis, 30 minutes)

Mounting and Physical Dimensions:

• Mounting Type: Panel mount
• Dimensions (W x H x D): 200mm x 140mm x 50mm (approximate)
• Weight: Approximately 500g

Certifications:

• CE Certification
• RoHS Compliance

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Samkoon GC-070-24M-C 7-Inch Integrated PLC & HMI
darazsales

GC-070-32MAA-C Samkoon DC 24V Integrated PLC & 4.3inch 480*272 HMI

The Samkoon GC-070-32MAA-C is a combination of a Programmable Logic Controller (PLC) and Human Machine Interface (HMI) in a single integrated unit.

Specifications:

• Model: GC-070-32MAA-C
• Power Supply: 24V DC
• Display Size: 4.3 inches
• Display Type: TFT LCD
• Resolution: 480 x 272 pixels
• Touchscreen: Yes, resistive touch

PLC Section:

• Processor: High-speed ARM-based microcontroller
• I/O Configuration:
  • Digital Inputs: 16 channels (24V DC, sink/source type)
  • Digital Outputs: 16 channels (Transistor, sink type)
  • Analog Inputs: None
  • Analog Outputs: None
• Expansion: Supports external I/O modules via an expansion port
• Communication Ports:
  • RS232: 1 port (for communication with external devices)
  • RS485: 1 port (supports Modbus RTU communication)
  • Ethernet Port: None
  • USB Port: For programming and data logging
• Memory:
  • Program Memory: 32K words
  • Data Memory: 10K words
  • Flash Memory: 128K for user programs

HMI Section:

• Screen: 4.3″ TFT color screen, 65K colors
• Resolution: 480 x 272 pixels
• Brightness: Adjustable
• Touchscreen Type: Resistive
• Storage: Flash memory for data logging and recipe management
• Communication Protocols: Supports Modbus RTU, and custom communication protocols via RS232/RS485
• Programming Software: Samkoon SKWorkshop
• USB: For program upload/download and data transfer
• Real-Time Clock: Yes, with a backup battery for time-keeping

Dimensions and Installation:

• Dimensions: Approx. 195 mm x 138 mm x 45 mm
• Mounting: Panel mount, with IP65 sealing for the front panel
• Weight: Around 0.9 kg

Programming and Compatibility:

• Programming Language: Ladder Logic (LD), Function Block Diagram (FBD)
• Software: Samkoon HMI and PLC programming environment (SKWorkshop)
• Communication Protocols: Supports Modbus RTU, custom protocols

Other Features:

• Password Protection: Yes, to secure user access and settings
• Data Logging: Yes, with support for saving logs on external USB drives
• Recipe Management: Yes, with internal memory support
• Alarm Handling: Built-in alarm system for monitoring operations

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Samkoon GC-070-32MAA-C 7-Inch Integrated PLC & HMI
darazsales

GC-043-16M-C Samkoon DC 24V Integrated PLC & 4.3inch 480*272 HMI

The Samkoon GC-043-16M-C combines a Programmable Logic Controller (PLC) and a 4.3-inch Human-Machine Interface (HMI) into a compact unit. Designed for industrial applications, it features a high-resolution touch screen, 8 digital inputs, 8 digital outputs (4 relay and 4 transistor), and supports communication protocols including RS232 and RS485. Its robust construction and user-friendly interface make it ideal for streamlining automation processes

Specifications

• Model: GC-043-16M-C
• Manufacturer: Samkoon
• Type: Integrated PLC (Programmable Logic Controller) with HMI (Human-Machine Interface)
• Power Supply: 24V DC

2. Display Features (HMI):

• Display Size: 4.3 inches
• Resolution: 480 x 272 pixels
• Touch Screen: Resistive touch panel
• Color: TFT LCD with 65K colors
• Brightness: Adjustable
• Display Mode: 2D display
• Backlight: LED backlight (Long-lasting)
• Touch Response: Accurate touch control for user interaction with fast response times

3. PLC Specifications:

• Type: Integrated controller with built-in I/O
• Input Voltage: 24V DC
• Inputs: 8 Digital Inputs
• Outputs: 8 Relay Outputs (rated at 5A)
• Maximum Current Load: 5A at 250V AC or 30V DC
• Output Type: Relay type, offering electrical isolation
• Control Logic: Ladder logic programming support
• Programming Language: Supports multiple languages such as Ladder Logic (LD), Function Block Diagram (FBD), and Structured Text (ST)
• Program Capacity: Up to 16,000 steps
• High-Speed Inputs: Supports high-speed pulse inputs for precise motion control
• Communication Ports:
  • 1 x RS232
  • 1 x RS485 for MODBUS RTU communication
  • Ethernet (optional)
• Clock: Real-time clock available for time-based control and operations

4. Memory & Storage:

• Memory Size: Built-in program memory (typically Flash-based)
• Data Logging: Capable of logging operational data
• Backup: Supports program backup in case of power failure

5. Environmental Conditions:

• Operating Temperature: -10°C to 55°C (14°F to 131°F)
• Storage Temperature: -20°C to 70°C (-4°F to 158°F)
• Humidity: 10% to 90% RH (non-condensing)
• Ingress Protection: IP65 front panel (properly installed)

6. Mounting:

• Installation Method: Panel mounting for HMI
• Dimensions: Approx. 128mm x 102mm x 34mm (without connector)
• Cutout Size: 119mm x 93mm for installation

7. Certifications:

• Compliance: CE, RoHS, FCC, ensuring safety and electromagnetic compatibility.

8. Additional Features:

• Real-Time Monitoring: Supports real-time monitoring of PLC operations via the HMI
• Alarms: Configurable alarms with sound and visual notification options
• Data Display: Graphical display of variables and system status
• Remote Monitoring: Optional remote control and monitoring feature via network communication.

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Samkoon GC-043-16M-C 4.3-Inch Integrated PLC & HMI
darazsales

Samkoon SK-070QS HMI 7 inch Touch Screen

Specifications:

• Model: Samkoon SK-070QS
• Type: Human-Machine Interface (HMI)
• Display Type: TFT LCD (Thin-Film Transistor Liquid Crystal Display)
• Touchscreen Type: Resistive touch panel

Display Specifications:

• Screen Size: 7 inches (diagonal)
• Resolution: 800 x 480 pixels (WVGA)
• Color Depth: 16-bit color (65,536 colors)
• Display Area: 154.08mm x 85.92mm
• Backlight Type: LED (Long lifespan)
• Brightness: Adjustable brightness levels
• Viewing Angle: Wide viewing angle suitable for different installation positions

Touch Panel Specifications:

• Touch Type: 4-wire resistive touch
• Touch Accuracy: < 1.5%
• Touch Durability: > 1 million touches
• Response Time: ≤ 10 ms

Processor and Memory:

• Processor: ARM Cortex A8, 600MHz CPU (high-performance processor for fast graphics rendering and multitasking)
• RAM: 128MB DDR3 RAM
• Flash Memory: 128MB internal storage for programs and configurations
• External Memory Support: Supports SD card expansion for additional program storage (up to 32GB)

Power Supply:

• Input Voltage: 24V DC (±10%)
• Power Consumption: ≤ 8W (typical)
• Power Protection:
  • Reverse polarity protection
  • Over-voltage protection

Communication Interfaces:

• Serial Ports:
  • 1x RS232
  • 1x RS485
  • 1x RS422
• Ethernet:
  • 1x 10/100 Mbps Ethernet port (RJ45 connector)
• USB:
  • 1x USB Host (for external devices like USB storage, printers, etc.)
  • 1x USB Client (for downloading/uploading programs)
• Protocol Support:
  • Modbus RTU
  • Modbus TCP/IP
  • Custom communication protocols (via RS232/RS485)
  • PLC-compatible protocols (Omron, Siemens, Mitsubishi, Delta, etc.)

Environmental Specifications:

• Operating Temperature: -10°C to 60°C
• Storage Temperature: -20°C to 70°C
• Operating Humidity: 10% to 90% RH (non-condensing)
• Storage Humidity: 10% to 90% RH (non-condensing)
• Vibration Resistance: 10 to 25Hz (X, Y, Z directions, 2 hours)
• Shock Resistance: 10G (11ms duration in X, Y, Z directions)

Mechanical Specifications:

• Panel Cutout Dimensions: 192mm x 138mm
• Overall Dimensions: 204mm x 150mm x 38mm
• Weight: Approx. 0.65 kg
• Mounting: Panel mount (includes clips for secure attachment)
• Front Panel Protection: IP65-rated (dust-tight and protected against water jets)
• Body Material: Flame-retardant plastic housing

Software and Functionality:

• Programming Software: Samkoon SKWorkshop (user-friendly interface for configuring HMI projects)
• Screen Configuration: Support for multiple windows and screens
• Screen Elements: Buttons, text boxes, graphs, data displays, alarms, and more
• Alarm Management: Real-time and historical alarms can be displayed
• Data Logging: Internal memory and SD card for logging data from connected devices (PLCs, sensors, etc.)
• Recipe Management: Can store and manage multiple recipe configurations
• Language Support: Multi-language interface (support for multiple languages on the same screen)
• Real-Time Clock: Built-in RTC (Real-Time Clock) with battery backup for time-based events and data logging
• Screen Navigation: Supports function keys, touch gestures, and custom macros
• Security: Password protection for user levels (administrator, operator, etc.)

LED Indicators:

• Power Indicator: Green LED when the device is powered on
• Communication Indicator: Blinking LED to show active data communication

Certifications and Standards:

• Compliance:
  • CE Marking (Conformité Européenne)
  • RoHS (Restriction of Hazardous Substances)
  • FCC (Federal Communications Commission)
• EMC Standards:
  • IEC61000-4-2 (ESD)
  • IEC61000-4-3 (Radiated Immunity)
  • IEC61000-4-4 (Electrical Fast Transient/Burst Immunity)

Applications:

• Industry Use:
  • Industrial automation
  • Machine control
  • Building automation
  • Food and beverage processing
  • Packaging machinery
  • Power distribution monitoring
• Connectivity: Can be connected to various PLCs, sensors, and industrial devices for multiple applications in control and monitoring systems.

Additional Features of Samkoon SK-070QS:

• Trend Display: Can display real-time data trends and historical data trends in a graphical format
• Event Logs: Supports event recording for tracking operational statuses and error messages
• Multi-Screen Support: Easily navigate through multiple screens and pages within an HMI application
• Recipe Handling: Efficient recipe management for automated processes in industries

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Samkoon SK-070QS HMI 7 inch Touch Screen
darazsales

Variable Frequency Drive VFD Three-Phase

380v Three-Phase Input To 380v Three-Phase Output

Variable Frequency Drives (VFDs) are devices used to control the speed and torque of electric motors by varying the motor input frequency and voltage. When considering a single-phase VFD, here are some typical specifications you might encounter:

1. Input Voltage:
   • Three-phase 380V AC
   • Input voltage range: ±10% of the rated voltage.
2. Output Voltage:
   • Three-phase  380V AC.
   • The output voltage is typically adjustable to match the motor’s requirements.
   • Input frequency range:40~65Hz
3. Control Methods:
   • V/f control (Volts per Hertz control).
   • Sensorless vector control.
   • Open-loop vector control.
   • Closed-loop vector control (in some advanced models)
4. Protection Features:
   • Overcurrent protection.
   • Overvoltage protection.
   • Undervoltage protection.
   • Short-circuit protection.
   • Ground fault protection.
   • Overload protection.

Applications:

• Pumps, fans, conveyors, and general-purpose motor control in single-phase power supply areas.

Additional Features (Optional):

• Built-in EMC filter.
• PID control for process control applications.
• Integrated braking chopper for dynamic braking.
• Programmable macros for specific applications.

Model: AE200H-4-3PH-0.5G-0.75P

Power: 0.5KW
Rated output current:1.2A
Input power range: 340V–420V 3 phases
Output power range: 0-380V 3 phases
Frequency range:50HZ–60HZ
Mounting hole(MM) 150*94 –Bore diameter 5 MM
Texture: plastic shell
Size：160*105*137 MM
Size with box: 210*155*176 MM
Net weight/ gross weight: 1.3kg

Model: AE200H-4-3PH-0.75G-1.5P

Power: 0.75KW;
Rated output current:2.5A;
Input power range: 340V–420V 3 phases ;
Output power range: 0-380V 3 phases;
Input frequency range :50HZ–60HZ;output frequency range 0–600HZ;
Mounting hole(MM) 150*94 –Bore diameter 5 MM
Texture: plastic shell ；
Size：160*105*137 MM
Size with box: 210*155*176 MM
Net weight/ gross weight: 1.4kg/1.5kg

Model: AE200H-4-3PH-1.5G-2.2P

Power :1.5KW
Rated output current:3.7A
Input power range: 320V–440V 3 phases
Output power range : 0-380V 3 phases
Frequency range:50HZ–60HZ
Mounting hole(MM) 150*94 –Bore diameter 5 MM
Texture: plastic shell
Size：160*105*137 MM
Size with box: 210*155*176 MM
Net weight/ gross weight: 1.5kg/1.6kg

Model: AE200H-4-3PH-2.2G-4P

Power:2.2KW;
Rated output current:5A;
Input power range: 320V–440V 3 phases ;
Output power range: 0-380V 3 phases;
Frequency range :50HZ–60HZ;
Mounting hole(MM) 150*94 –Bore diameter 5 MM
Texture: plastic shell ；
Size：160*105*137 MM
Size with box: 210*155*176 MM
Net weight/ gross weight: 1.5kg/1.6kg

Model: AE200H-4-3PH-3G-4P

Power:3KW
Rated output current:7.5A;
Input power range: 320V–440V 3 phases ;
Output power range: 0-380V 3 phases;
Frequency range :50HZ–60HZ;
Mounting hole(MM) 150*94 –Bore diameter 5 MM
Texture: plastic shell ；
Size：245*170*190 MM
Size with box: 245*155*176 MM
Net weight/ gross weight: 2.25kg/3kg

Model: AE200H-4-3PH-4G-5.5P

Power:4KW;
Rated output current:9A;
Input power range: 320V–440V 3 phases ;
Output power range: 0-380V 3 phases;
Frequency range :50HZ–60HZ;
Mounting hole(MM) 207*103 –Bore diameter 5 MM
Texture: plastic shell ；
Size：212*114*144 MM
Size with box: 245*170*190 MM
Net weight/ gross weight: 2.5kg/3kg

Model: AE200H-4-3PH-5.5G-7.5P

Power:5.5KW;
Rated output current:13A;
Input power range: 320V–440V 3 phases ;
Output power range: 0-380V 3 phases;
Frequency range :50HZ–60HZ;
Mounting hole(MM) 207*103 –Bore diameter 5 MM
Texture: plastic shell ；
Size：212*114*144 MM
Size with box: 230*165*210 MM
Net weight/ gross weight: 2.5kg/3kg

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Variable Frequency Drive VFD Three-Phase Input To Three-Phase Output AE200H
darazsales

Variable Frequency Drive VFD Single Phase

220v Single phase input To 380v Three phase output

Variable Frequency Drives (VFDs) are devices used to control the speed and torque of electric motors by varying the motor input frequency and voltage. When considering a single-phase VFD, here are some typical specifications you might encounter:

1. Input Voltage:
   • Single-phase 220V AC
   • Input voltage range: ±10% of the rated voltage.
2. Output Voltage:
   • Three-phase  380V AC.
   • The output voltage is typically adjustable to match the motor’s requirements.
   • Input frequency range:40~65Hz
3. Control Methods:
   • V/f control (Volts per Hertz control).
   • Sensorless vector control.
   • Open-loop vector control.
   • Closed-loop vector control (in some advanced models)
4. Protection Features:
   • Overcurrent protection.
   • Overvoltage protection.
   • Undervoltage protection.
   • Short-circuit protection.
   • Ground fault protection.
   • Overload protection.

Applications:

• Pumps, fans, conveyors, and general-purpose motor control in single-phase power supply areas.

Additional Features (Optional):

• Built-in EMC filter.
• PID control for process control applications.
• Integrated braking chopper for dynamic braking.
• Programmable macros for specific applications.

Model: FE550-2-1PH-0.75G-1.5P

Power: 0.75KW
Rated output current: 2.5A
Input power range: 180V–250V 1 phase
Output power range: 0-380V 3 phases
Frequency range: 50HZ–60HZ
Mounting hole(MM): 173*114 –Bore diameter 5 MM
Texture: plastic shell
Size: 185*125*165 MM
Size with box: 230*165*210 MM
Net weight/ gross weight: 2.5kg/3kg
Panel and user manual: English only

Model: FE550-2-1PH-1.5G-2.2P

Power: 1.5KW
Rated output current: 3.7A
Input power range: 180V–250V 1 phase
Output power range: 0-380V 3 phases
Frequency range: 50HZ–60HZ
Mounting hole(MM): 173*114 –Bore diameter 5 MM
Texture: plastic shell
Size: 185*125*165 MM
Size with box: 230*165*210 MM
Net weight/ gross weight: 2.5kg/3kg
Panel and user manual: English only

Model: FE550-2-1PH-2.2G-4.0P

Power: 2.2KW
Rated output current: 5A
Input power range: 180V–250V 1 phase
Output power range: 0-380V 3 phases
Frequency range: 50HZ–60HZ
Mounting hole(MM): 173*114 –Bore diameter 5 MM
Texture: plastic shell
Size: 185*125*165 MM
Size with box: 230*165*210 MM
Net weight/ gross weight: 2.5kg/3kg
Panel and user manual: English only

Model: FE550-2-1PH-4.0G-5.5P

Power:4KW
Rated output current:9A
Input power range: 320V–440V 3 phases
Output power range: 0-380V 3 phases
Frequency range:50HZ–60HZ
Mounting hole(MM): 207*103 –Bore diameter 5 MM
Texture: plastic shell
Size：212*114*144 MM
Size with box: 245*170*190 MM
Net weight/ gross weight: 2.5kg/3kg

Model: FE550-2-1PH-5.5G-7.5P

Power: 5.5KW
Rated output current: 12A
Input power range: 180V–250V 1 phase
Output power range: 0-380V 3 phases
Frequency range: 50HZ–60HZ
Mounting hole(MM): 234*148 –Bore diameter 6 MM
Texture: plastic shell
Size: 247*160*185 MM
Size with box: 300*210*240 MM
Net weight/ gross weight: 4.5kg/6kg
Panel and user manual: English only

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Variable Frequency Drive VFD Single phase Input To Three phase Output FE550
darazsales

PLC Industrial Control Module FX3U 14MT

The PLC Industrial Control Module FX3U 14MT Extreme Pro is built to withstand extreme conditions, making it ideal for outdoor adventures and challenging shooting environments. It is temperature-proof, waterproof, shockproof, and X-ray proof, ensuring that your valuable data remains safe and secure

Features:

PLC Industrial Control Module FX3U 14MT
darazsales

Delta 4.3 Inch HMI Touch Screen DOP-103BQ
darazsales