Tact Switch 6×6 Tactile Push Button

General Information

• Type: Tactile Push Button
• Model: 6×6 Tact Switch
• Actuation Method: Momentary (push-to-make, release-to-break)

Physical Specifications

• Dimensions:
  • Length x Width: 6mm x 6mm
  • Height: Varies depending on the actuator type, typically between 4.3mm to 13mm
• Terminal: Through-hole (4 pins)
• Actuator: Round, typically 3.5mm diameter
• Contact Configuration: Single-pole, single-throw (SPST)
• Pin Spacing: 4.5mm spacing between pins on each side
• Pin Type: Solder-type legs for PCB mounting

Electrical Specifications

• Contact Rating: 50mA @ 12V DC
• Contact Resistance: ≤ 100mΩ (initial)
• Insulation Resistance: ≥ 100MΩ @ 100V DC
• Dielectric Strength: 250V AC (1 minute)
• Operating Voltage: Typically up to 12V DC

Mechanical Specifications

• Operating Force: Typically available in multiple actuation forces, ranging from:
  • 100gf ± 30gf (soft)
  • 160gf ± 50gf (standard)
  • 260gf ± 50gf (firm)
• Travel Distance: 0.25mm to 0.3mm
• Lifespan: 100,000 to 1,000,000 cycles (depending on the model and usage)

Environmental Conditions

• Operating Temperature: -20°C to +70°C
• Storage Temperature: -30°C to +80°C
• Humidity: Up to 85% RH

Materials

• Actuator Material: Thermoplastic (UL94V-0)
• Contact Material: Silver or gold-plated
• Terminal Material: Copper alloy with silver plating
• Base Material: Nylon (UL94V-0)

Mounting Details

• Mounting Method: Through-hole soldering on PCB
• Lead-Free: RoHS Compliant

Applications

• Remote controls
• Consumer electronics (e.g., calculators, TVs, audio equipment)
• Industrial control panels
• Toys and gaming devices
• Home appliances