PLC

FX3U ENET ADP Mitsubishi Electric Ethernet Interface Block


මෙම අයිතමය අපගේ වෙබ් අඩවියෙහි Shipping from Overseas
සේවාව යටතේ ගෙන්වන බැවින් මෙය ඔබ හට ලැබීමට
වැඩ කරන දින 10 – 20 පමණ ගත වේ.
මෙම අයිතමය ඔබ ඇනවුම් කල පසු මෙහි සියලුම යාවත් කාලීන කටයුතු e-mail මගින් සිදු කෙරේ
ස්තූතියි!

Add to Quote

Compare
mitsubishi electric

FX3U ENET ADP Mitsubishi Electric Ethernet Interface Block

Specification

    • Manufacturer: Mitsubishi Electric
    • Product No.: FX3U-ENET-ADP
    • Product type: Ethernet Interface Block
    • Transmission Specifications Data transmission speed: 100Mbps or 10Mbps,
    • Communication mode: Full / half duplex
    • Transmission method: Baseband
    • The maximum segment length: 100m
    • The maximum number of nodes / connection: 10BASE-T: cascade up to four stages
      100BASE-TX: cascade up to two-stage
    • above is the connection possible number of stages at the time of use repeater hub.
      Can be connected to the number of stages at the time of switching hub used, please check with the manufacturer of the switching hub to be used.
    • Connector: RJ45
    • Number of connections: MELSOFT connection + MC protocol + data monitoring ? 4 connection
    • It can be connected to the number of the basic unit: One
      Ethernet adapter, as well as the communication function expansion board and other communication special adapter, and 1 channel the communication channel (CH) occupation.
    • Apply PLC: FX3S, FX3G (V2.00 or later), FX3U (since V3.10), FX3GC (V2.00 or later), FX3UC (V3.10 or later)
      connection to the FX3S is required FX3S-CNV-ADP.
      Connection to the FX3G is required FX3G-CNV-ADP.
      FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board.

Power Specifications:

  • Power supply: 30mA / DC5V (internal power supply from DC5V power of the basic unit)
  • Allowable momentary power failure time: As well as the sequencer to connect
  • Ambient temperature: 0 ~ 55 °C ····· operation, -25 ~ 75 °C ····· during storage
  • Relative humidity: 5 ~ 95% RH (non-condensing) …… operation
  • Vibration resistance When the DIN rail mounting Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
  • Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
  • Direct mounting at the time Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
  • Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
  • Impact resistance: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each
  • Anti-noise: Noise voltage 1,000Vp-p, noise width 1µs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator
  • Withstand voltage: All terminals and between the ground terminal: AC500V 1 minute
  • Insulation resistance: All terminals and between the ground terminal: DC500V 5MO more in insulation resistance tester
  • Working environment: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly
  • Use advanced: 2000m or less cannot use in the pressurized environment to more than atmospheric pressure. There is a possibility of failure.
  • Shipping Weight: 1.5 Kg

Packages include:

1x FX3U ENET ADP Mitsubishi Electric

 

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

SKU: LKIA00087 Category: Tags: , , ,

Brand

Mitshubishi Electric

Established in 1977, Mitsubishi Electric Asia has been offering reliable, high-performance products and services ranging from home electronics, industrial and factory automation, space systems, public utility systems and semiconductors to homes, businesses and industries in Asia Pacific.
mitsubishi electric

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “FX3U ENET ADP Mitsubishi Electric Ethernet Interface Block”

There are no reviews yet.