The Cooper suntree three-module photovoltaic Surge Protective Device (SPD) (with three-step DC switching device) features visual indication and optional remote contact signaling (floating changeover contact) for use in PV systems. These complete surge protective devices are suitable for all PV systems in accordance with IEC 60364-7-712. Includes a five year limited warranty.

These pre-wired solutions consist of a base and locking modules that feature a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant `l circuit prevents damage to the surge protective devices.

The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication,the remote signaling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed.

Dimension

 

 

Short-Circuit Interrupting (SCI) Technology

 

 

 

Specifications

SUP2H-PV series surge protector		SUP2H1-PV	SUP2H1-PV	SUP2-PV
UCPV(VDC)		1000V	1200V	1500V
Max system discharge current (8/20μs)Imax		40KA	40KA	40KA
Voltage Protection level(up)		≤4.0KV	≤4.5KV	≤4.5KV
Voltage Protection level at 5kA(up)		≤3.6KV	≤4.0KV	≤5.0KV
Integrated Fuse breaking capacity/interrupting rating		40KA/1000vdc	40KA/1200vdc	40KA/1500vdc
technology		Short-Circuit interruption (SCI)overcurrent protection
Operating temperature range（TU）		-40℃ to +80℃
Nominal discharge current (8/20 μs){（DC+/DC-）＞PE}（In）		20KA
Response time (A)		＜25ns
Operating State/Fault indication		Green (good)/RED(repiace)
Conductor rating and cross-sectional Area	Minimum	60/75℃ 1.5mm2/14AWG solid/flexible
	Maximum	60/75℃ 35mm2/2AWG stranded/25mm2/4AWG flexible
Mounting		35mm DIN rall per EN 60715
Enclosure material		UL 90VO thermopiastic
Degree of Protection		IP20
Capacity		3 Modules,DIN 43880
Standards information		IEC 61643-31 Type2,IEC 61643-1 ClassⅡ
product Warranty		Five Years

Remote Contact signaling​

Remote Contact signaling Type	Changeover contact
AC switching capacity(volts/Amps)	250V/0.1A
DC switching capacity(volts/Amps)	250V/0.1A;125V/0.2A;75V/0.5A
Conductor ratings and cross-sectional area for remote Contact signal terminals	60/75℃Max,1.5mm2/14AWG solid/flexible
		Ordering	Order from Catalog numbers Above

 

Typical Application Schematics

 

Does not apply to 1200Vdc
1.Use a suitable electrical insulator to keep a 10mm min.safety distance from the PV-SPD and other grounfed parts in the housing.
2.No metal covers are in the area of the module release as shown.

 

IVISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP