6500W 220Vac 48Vdc Hybrid Inverter Charger

The 6500W AC 220V DC 48V pure sine wave Hybrid Inverter Charger blends technology and aesthetics, with a unique glass top cover and touch buttons design enhancing its appearance and usability. It has a power factor of 1.0 and a standby power consumption of only 2W, ensuring efficiency and reliability.

• Model : POW-HVM6.5K-48V
• Rated Load Power : 6500W
• Ac Output : 230Vac±5%
• DC Output : 48V
• Phase : Single Phase
• PV Array MPPT Voltage Range : 55V-450V (PV minimum input voltage is 120V without battery)
• Max Solar Panel Input Power : 6500Watt
• Compatible Battery : LiFePO4 Batteries, AGM Batteries, Lithium Batteries, Flooded Batteries, User Mode, Sealed Lead Acid Batteries, Gel Batteries

130A Built-In MPPT Solar Charge Controller

This product boasts a wide voltage range of 55~450Vdc for PV access, and a built-in 130A MPPT solar charger (Max. PV). Compatible with 48V lithium-ion batteries, LiFePO4 batteries (User Mode), AGM batteries, Gel batteries, and Flooded batteries, it achieves a maximum solar charging efficiency of up to 98%.

Three Safe Charging Modes

Only Solar, Solar priority, and Utility Priority, can meet different application requirements of users. In addition, the hybrid inverter has intelligent heat dissipation that turns on different heat dissipation effects depending on the device’s temperature. And the two Solar Priority output modes (SUB, SBU) can maximize the use of solar energy.

LED Display for Real-Time Charging Data

This inverter charger features an LCD for real-time system data and operating status. Error codes are displayed for easy troubleshooting. The LED indicators provide at-a-glance operation information, making it practical and user-friendly.

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

6500W 220Vac 48Vdc Hybrid Inverter Charger
darazsales

PowMr 3KW Off Grid Inverter All in One Inverter Charger 220Vac 24Vdc
darazsales

PowMr Solar connectors MC4 Male/Female IP67 Solar Connectors

Overview:

❶PowMr Solar connectors MC4 Solar Connector Conductor pin is tinned Copper: made of PPO + PA material, It makes a rock-solid connection after you crimp the pin to the wire, and these are operated perfectly under heavy load. WATERPROOF RING on connection is perfect to seal out water and dust to prevent corrosion, PPO INSULATION MATERIAL with excellent aging resistance and UV endurance can resist severe weather such as heavy rain, snowstorm, or heat for a long time.

❷UL certification Solar Connectors Rated voltage – TUV 1000V DC / UL 600V DC; Rated Current:30A; These solar connectors Hard plastic IP67 Waterproof and resist dust build-up.

❸These solar connectors are designed to complete a solar panel (PV) array, typically in parallel applications

❹UL certification fastness of male and female points with a stable self-locking system that is easy to lock and open. anti-aging and resistance to ultraviolet radiation.

Features:

• Quick & simple assembly processing and simple removal of plugs
• Compatible with different insulation diameters
• Double seal ring, better waterproof
• Connection by the crimping tool
• Insulation Material: Made of PPO + PA material.
• Required Tools: < 1.Wire Stripping pliers > < 2. Line pressing pliers > < 3.Special wrench >

Specifications:

• Maximum working voltage: DC 1000 V
• Rated Current: 30A
• Suitable for: 2.5mm²( AWG14 ), 4mm²( AWG12 ), 6mm²( AWG10 )
• Contact resistance: ≤1mmΩ
• Pollution degree: 2
• Temperature Range: -40 ℃ ~ +85 ℃
• Flame class: UL94-V0
• Waterproof Class: IP67
• Insertion force: ≤50N
• Withdrawal force: ≥50N

Package include :1 x  PowMr Solar connectors MC4

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

PowMr Solar connectors MC4 Male/Female IP67 Solar Connectors
lahiru Dhananjaya

POWMR Solar Panel T Branch 1 Male to 3 Female and 1 Female to 3 Male

Specification of  POWMR Solar Panel T Branch

POWMR Solar Panel T Branch 1male to 3 Female
lahiru Dhananjaya

POWMR Solar T Branch Panel Connectors 1 to 4 Mc4 Connector MC4T-AN4

POWMR Solar T Branch Panel Connectors 1 to 4
lahiru Dhananjaya

4500W Inverter Charger DC 24V AC 220V

Introduction

PowMr 4500W Inverter Charger Off-Grid 24V Solar Inverter Built-in 150A MPPT Charge Controller, Pure Sine Wave Inverter Single-phase output 220VAC/230VAC/240VAC, 4.5KW new all-in-one inverter combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package.

POWMR 4500W Inverter Charger DC 24V AC 220V
lahiru Dhananjaya

PowMR 40A Solar Panel Battery Charge PWM Controller12V 24V

Features:

• Built-in industrial microcontroller.
• Large LCD screen, all parameters adjustable.
• Full level 4 PWM charging management.
• Built-in short circuit protection, open circuit protection, reverse connection protection, and overload protection.

Specifications:

• Rated voltage: 12V 24V automatic
• Application: Solar energy system controller
• Current: 40A
• With a timer and light sensor, it can be used in solar lighting systems.
• Only suitable for off-grid PHOTOVOLTAIC solar systems.
• For 10A 12V PV systems: 120W solar panels, 12V lead-acid batteries, 21V for maximum input voltage
• For 20A 24V PV systems: 240W solar panels, 24V lead-acid batteries, 42V for maximum input voltage

Safety instructions

• Before installing the battery for the first time, ensure that the battery has enough voltage to enable the controller to identify the battery type.
• Battery cables should be as short as possible to minimize loss.
• The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL
• It does not work with nickel-metal hydride, lithium-ion, or other batteries.
• Charge regulators are only suitable for regulating solar modules. Do not connect other charging sources to the charging regulator.

System connection

• Connect the battery to the charging regulator – positive and negative. If a 12V battery is detected, it will display 1; If a 24V battery is seen,
• Connect the PV module to the regulator – positive and negative.
• Connect the user to the charging regulator – positive and negative.
• The reverse order applies when unloading
• The improper sequence will damage the controller!

Available in 20A 30A 40A models

20 A:

If your battery is 12V, the maximum solar panel input is 25V 240W
If your battery is 24V, the maximum solar panel input is 50V 480W

30A

If your battery is 12V, the maximum solar panel input is 25V 360W
If your battery is 24V, the maximum solar panel input is 50V 720W

40A

If your battery is 12V, the maximum solar panel input is 25V 480W
If your battery is 24V, the maximum solar panel input is 50V 960W

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

PowMR 40A PWM Solar Panel Battery Charge Controller12V 24V
darazsales

PowMR 30A PWM Solar Panel Battery Charge Controller12V 24V

Features:

• PowMr Built-in industrial microcontroller.
• Large LCD screen, all parameters adjustable.
• Full level 4 PWM charging management.
• short circuit protection,
• open circuit protection,
• reverse connection protection and overload protection.

Specifications:

• Rated voltage: 12V 24V automatic
• Application: Solar energy system controller
• Current: 30A
• With a timer and light sensor, it can be used in solar lighting systems.
• Only suitable for off-grid PHOTOVOLTAIC solar systems.
• For 10A 12V PV systems: 120W solar panels, 12V lead-acid batteries, 21V for maximum input voltage
• For 20A 24V PV systems: 240W solar panels, 24V lead-acid batteries, 42V for maximum input voltage

Safety instructions

• Before installing the battery for the first time, ensure that the battery has enough voltage to enable the controller to identify the battery type.
• Battery cables should be as short as possible to minimize loss.
• The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL
• It does not work with nickel-metal hydride, lithium-ion, or other batteries.
• Charge regulators are only suitable for regulating solar modules. Do not connect other charging sources to the charging regulator.

System connection

• Connect the battery to the charging regulator – positive and negative. If a 12V battery is detected, it will display 1; If a 24V battery is seen,
• Connect the PV module to the regulator – positive and negative.
• Connect the user to the charging regulator – positive and negative.
• The reverse order applies, unloading.
• The improper sequence will damage the controller!

Available in 20A 30A 40A models

20 A:

If your battery is 12V, the maximum solar panel input is 25V 240W
If your battery is 24V, the maximum solar panel input is 50V 480W

30A

If your battery is 12V, the maximum solar panel input is 25V 360W
If your battery is 24V, the maximum solar panel input is 50V 720W

40A

If your battery is 12V, the maximum solar panel input is 25V 480W
If your battery is 24V, the maximum solar panel input is 50V 960W

Packages include.

1 x 30A PWM Solar Panel Battery Charge

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

PowMR 30A PWM Solar Panel Battery Charge Controller 12V 24V
darazsales

PowMr 6200W Hybrid Inverter Charger 220Vac 48Vdc

The PowMr 6200W Hybrid Inverter is a high-performance and reliable power solution designed for both residential and commercial use. With its advanced hybrid technology, this inverter seamlessly combines the benefits of both grid-tied and off-grid systems, providing users with uninterrupted power supply and maximum energy efficiency.

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

PowMr 6200W Hybrid Inverter Charger 220Vac 48Vdc
lahiru Dhananjaya

owMr 2400Watt DC 24V AC 220V All In One Solar Inverter Charger POW-HVM2.4H-24V

INTRODUCTION

This is a multi-function all in one inverter charger, combining functions of inverter, solar charger, and battery charger to offer uninterruptible power support with portable size.
Its comprehensive as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Features

• Pure sine wave 24V inverter
• Configurable input voltage range for home appliances and personal computers via LCD setting
• Configurable battery charging current based on applications via LCD setting
• Configurable AC/Solar Charger priority via LCD setting
• Compatible with mains voltage or generator power
• Auto restart AC is recovering
• Overload/ Over temperature/ short circuit protection
• Smart battery charger design for optimized battery performance
• Cold start function
• WIFI/GPRS(Option)
• Can connect to lithium battery

Data Sheet

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

PowMr 2400Watt DC 24V AC 220V All In One Solar Inverter Charger POW-HVM2.4H-24V
lahiru Dhananjaya