Horizontal Type Mechanical Limit Switch Module with Cable

Specifications

• Switch Type: Mechanical Limit Switch (Horizontal type) Limit switch with cable
• Operating Voltage: 5V to 30V (commonly 5V in 3D printers)
• Current Rating: 5A (depends on the model, usually ranges between 0.5A and 5A)
• Contact Type: Normally Open (NO) / Normally Closed (NC) (varies by model)
• Cable Length: Varies by model, generally between 1 meter to 2 meters
• Cable Type: 3-wire (for signal, VCC, and ground)
  • Red: VCC (Power)
  • Black: GND (Ground)
  • White: Signal (Trigger)
• Mounting Hole Size: Commonly 2mm to 4mm diameter
• Operating Force: Typically between 20g and 150g
• Switch Housing Material: Plastic or metal (depends on model)
• Dimensions: Approx. 20mm x 15mm x 10mm (may vary by model)
• Connection Type: Dupont-style connector or bare wire, depending on the model
• Working Environment:
  • Temperature Range: -25°C to 80°C
  • Humidity: 35% to 85% relative humidity (non-condensing)

Features (CNC limit switch)

• Applications: Used as end stops or home position detectors in 3D printers, CNC machines, or other robotic systems.
• Response Time: Very quick switching time for accurate positional control.
• Mounting Orientation: Horizontal (sideways mount for better alignment with moving parts).

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Horizontal Type Mechanical Limit Switch Module with Cable
darazsales

CNC Shield V3 Engraving Machine

The CNC Shield V3 Engraving Machine is a high-quality, versatile tool for precision engraving. With its advanced CNC technology, this machine is capable of producing intricate designs with ease. Its compact size and user-friendly interface make it ideal for both professional and hobbyist use. Upgrade your engraving capabilities with this machine.

UNO and Module IO Correspondence between the
introduction port

The basic needs of the stepper motor control other pins are in the engraving machine, or
3D Wen the printer was used, here we do not make Detailed, IO It corresponds to the
below figure.

UNO for Arduino module IO port correspondence introduction.

UNO for Arduino———————- expansion board

8 ———————— EN ( stepper motor driver enable, active low )

7 ———————– Z.DIR (Z-axis direction control )

6 ———————– Y.DIR (Y-axis direction control )

5 ———————– X.DIR (X-axis direction control )

4 ———————- Z.STEP (Z-axis stepper control )

3 ———————- Y.STEP (Y-axis stepper control )

2 ———————- X.STEP (X-axis stepper control )

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

CNC Shield V3 Engraving Machine
Ashen Premathilake

Introduction

CNC Shield Expansion Kit with 4Pcs A4988 Stepper Motor Driver For Arduino
Ashen Premathilake