MG996R 180 Degree Metal Gear High Torque Servo Motor

• Model: MG996R
• Type: Digital Servo Motor
• Angle Range: 180° (approx.)
• Gears: Metal gears for durability and high torque capability
• Bearing: Double ball-bearing mechanism
• Control System: Pulse Width Modulation (PWM)
• Rotational Direction: Counter-clockwise (CCW)
• Connector Type: 3-pin (PWM Signal, Vcc, Ground)

Electrical Specifications:

• Operating Voltage: 4.8V to 7.2V
• Operating Current: ~500mA (idle), up to 2.5A (under stall conditions)
• Control Signal: PWM (Pulse Width Modulation)
  • Pulse Range: 500µs to 2500µs
  • Neutral Position: 1500µs (90°)
• Signal Frequency: 50Hz (standard servo control)

Performance Specifications:

• Torque:
  • 9.4 kg·cm at 4.8V
  • 11 kg·cm at 6V
• Speed:
  • 0.19 seconds/60° at 4.8V
  • 0.15 seconds/60° at 6V
• Max. Angular Displacement: 180° ±10%

Physical Characteristics:

• Dimensions: 40.7 x 19.7 x 42.9 mm
• Weight: 55g
• Material:
  • Case: Plastic
  • Gears: Metal
• Shaft Type: 25T Spline (compatible with standard servo horns)

Connector Pinout:

1. Orange/White Wire: Signal (PWM)
2. Red Wire: Vcc (Power Supply)
3. Brown/Black Wire: Ground

Thermal and Environmental Specifications:

• Operating Temperature: -10°C to +50°C
• Storage Temperature: -20°C to +60°C
• Shock and Vibration Resistance: Moderate for general applications

Accessories Included:

• Multiple servo horns (varied shapes)
• Mounting screws
• Servo horn fixing hardware

Applications:

• Robotics (arms, joints, and grippers)
• Radio-controlled (RC) cars, planes, and boats
• DIY and hobby projects
• Automation systems requiring precise positioning

MG996R 180 Degree Metal Gear High Torque Servo Motor
darazsales

Stoke Length 100MM 20MM/S 450N DC6V-24V Nema17 Stepper Electric Push Rod

Specifications

1. Model: Electric Push Rod Actuator with NEMA17 Stepper Motor
2. Stroke Length: 100mm (customizable on request)
3. Speed: 20mm/s
4. Rated Force (Push/Pull): 450 Newtons (N)
5. Input Voltage: DC6V-24V
6. Motor Type: NEMA17 Stepper Motor
7. Drive Mechanism: Lead screw drive (commonly Trapezoidal Thread)
8. Repeatability: ±0.05mm
9. Mounting Configuration:
   • Front and Rear Clevis (Standard)
   • Optional Mounting Brackets

Mechanical Specifications

1. Actuator Structure:
   • Aluminum Alloy Housing (Lightweight and Corrosion Resistant)
   • Stainless Steel Lead Screw and Push Rod Shaft
2. Step Angle: 1.8° (200 steps per revolution)
3. Lead Screw Pitch: Commonly 2mm or 4mm depending on travel speed and resolution requirements
4. Static Load-Holding: 450N (without power to motor)
5. Duty Cycle: 20-30% (Continuous usage at max load will affect lifespan)
6. Ingress Protection (IP Rating): IP54 (Dust and Light Water Splash Protection)
7. Backlash: ≤ 0.05mm

Electrical Specifications

1. Input Voltage: DC6V to 24V
2. Current per Phase: 1.5A to 2A (Varies by Motor Model)
3. Wiring Configuration: 4-wire Bipolar Stepper Motor
   • Color Coding (Standard): Red, Green, Yellow, Blue
4. Torque (Holding): Approx. 40-60 N·cm (Varies by Stepper Motor Specs)
5. Control Compatibility:
   • Stepper Motor Drivers (e.g., A4988, DRV8825, TMC2209)
   • Microcontrollers (Arduino, Raspberry Pi, PLCs)

Performance Specifications

1. Speed Range: Adjustable via stepper motor driver or pulse signal
2. Resolution: Depends on driver micro-stepping settings
   • Example: 1mm per revolution with 200 steps = 0.005mm per step
3. Acceleration/Deceleration: Programmable via motor driver or controller
4. Noise Level: ≤ 55dB under normal operating conditions

Environmental Conditions

1. Operating Temperature: -10°C to +50°C
2. Storage Temperature: -20°C to +70°C
3. Relative Humidity: 10% to 85% (non-condensing)

Applications

1. Precision Motion Control Applications
2. Automation Equipment
3. Linear Positioning Systems
4. Robotics and CNC Machines
5. Medical Devices
6. Industrial Automation

Stoke Length 100MM 20MM/S 450N DC6V-24V Nema17 Stepper Electric Push Rod
darazsales

Stoke Length 50MM 10MM/S 500N DC6V-24V Nema17 Stepper Electric Push Rod

Specification for Electric Push Rod (Linear Actuator)

1. General Information

• Type: NEMA17 Stepper Motor Integrated Electric Push Rod (Linear Actuator)
• Stroke Length: 50 mm
• Push/Pull Force: 500 N (50 kg)
• Speed: 10 mm/s
• Voltage Input: DC 6V to 24V

2. Stepper Motor Parameters (NEMA 17)

• Motor Type: Bipolar Stepper Motor
• Step Angle: 1.8° (200 steps per revolution)
• Rated Voltage: 6V to 24V (compatible with various drivers)
• Current Per Phase: 1.2A to 2.0A (based on application)
• Holding Torque: Approximately 40 – 45 N·cm
• Phase Resistance: 1.5 to 2.0 ohms
• Inductance: 2.5 to 4.0 mH

3. Linear Actuator Parameters

• Stroke Length: 50 mm
• Push/Pull Force: 500 N (maximum)
• Travel Speed: 10 mm/s (under no load, may vary slightly with load)
• Lead Screw Type: Trapezoidal Thread (e.g., T8x2 or T8x4)
• Screw Lead: 2 mm to 4 mm per revolution
• Backlash: ≤ 0.05 mm
• Self-locking: Yes, due to lead screw design

4. Mechanical Properties

• Material:
  • Push Rod: Stainless Steel or Aluminum Alloy
  • Housing: Anodized Aluminum Alloy
• Maximum Load: 500 N
• Mounting Bracket Options: Front and rear clevis brackets (standard)
• Duty Cycle: 20% (maximum 2 minutes continuous operation within 10 minutes)
• Noise Level: ≤ 55 dB (at 1 meter distance)
• Life Span: 100,000 cycles under rated load

5. Electrical Properties

• Current Draw: Varies with load and voltage (typical range: 1.5A to 3A)
• Drive Type: Microstepping Driver (recommended for smooth operation)
• Control Mode: Step and Direction Signals (pulse-based control)

6. Environmental Specifications

• Operating Temperature: -10°C to 50°C
• Storage Temperature: -20°C to 60°C
• Protection Level: IP54 (standard) / Optional IP65 for dust and water resistance
• Vibration Resistance: Complies with IEC 60068-2-6

7. Applications

• CNC Machines
• Robotics
• Precision Automation Systems
• Adjustable Mechanisms
• Laboratory and Medical Equipment
• Linear Motion Systems

8. Dimensions

• Motor Size: NEMA 17 (42 mm x 42 mm)
• Overall Length: Varies based on stroke and configuration (~150 mm to 200 mm)
• Mounting Interface: 4 x M3 or M4 holes at NEMA 17 faceplate
• Rod Diameter: 8 mm (typical)
• End Connectors:
  • Standard Clevis Mount
  • Threaded Rod End (optional)

Stoke Length 50MM 10MM/S 500N DC6V-24V Nema17 Stepper Electric Push Rod
darazsales

Stroke Length 200MM 7mm/S 1500N DC12V Electric Putter Electric Linear Actuator

Technical Specifications:

1. Input Voltage:
   • DC 12V
2. Stroke Length:
   • 200mm
3. Speed:
   • 7mm/s (no load)
4. Rated Thrust (Force):
   • 1500N (150 kg or approximately 330 lbs)
5. Duty Cycle:
   • 20% (max 2 minutes continuous operation, then rest for 8 minutes)
6. Protection Grade:
   • IP54 (Dust and water-resistant for light splashes)
7. Operating Temperature:
   • -20°C to +65°C
8. Noise Level:
   • ≤ 50 dB
9. Material:
   • Outer casing: Aluminum Alloy
   • Internal components: Steel/Aluminum
10. Mounting Type:

• Front and rear clevis brackets (standard mounting holes)

11. Retracted Length:

• Stroke length (100mm) + ~160mm body length = ~260mm total retracted length

12. Extended Length:

• Retracted length + Stroke (100mm) = ~360mm extended length

13. Rated Current:

• 3A to 5A (depending on load)

14. Load Capacity:

• Capable of operating at full load with 1500N thrust

15. Wire Length:

• Standard: 1 meter (customizable upon request)

16. End Type:

• M8 or M10 mounting holes (depending on the design)

17. Control Mode:

• Standard: Polarity reversal via a switch for extending/retracting
• Compatible with external controllers (e.g., relays, remote control systems)

18. Lifespan:

• 40,000+ cycles under rated load conditions

Applications:

• Automotive components (e.g., RVs, adjustable car seats)
• Medical beds and chairs
• Industrial machinery
• Home automation (windows, solar panel tilts, recliners)
• Agricultural equipment (e.g., harvesters, tractors)
• Furniture applications (e.g., standing desks, recliners)

Stroke Length 200MM 7mm/S 1500N DC12V Electric Putter Electric Linear Actuator
darazsales

Stroke Length 100MM 7mm/S 1500N DC12V Electric Putter ElectricLinear Actuator

Technical Specifications:

1. Input Voltage:
   • DC 12V
2. Stroke Length:
   • 100mm
3. Speed:
   • 7mm/s (no load)
4. Rated Thrust (Force):
   • 1500N (150 kg or approximately 330 lbs)
5. Duty Cycle:
   • 20% (max 2 minutes continuous operation, then rest for 8 minutes)
6. Protection Grade:
   • IP54 (Dust and water-resistant for light splashes)
7. Operating Temperature:
   • -20°C to +65°C
8. Noise Level:
   • ≤ 50 dB
9. Material:
   • Outer casing: Aluminum Alloy
   • Internal components: Steel/Aluminum
10. Mounting Type:

• Front and rear clevis brackets (standard mounting holes)

11. Retracted Length:

• Stroke length (100mm) + ~160mm body length = ~260mm total retracted length

12. Extended Length:

• Retracted length + Stroke (100mm) = ~360mm extended length

13. Rated Current:

• 3A to 5A (depending on load)

14. Load Capacity:

• Capable of operating at full load with 1500N thrust

15. Wire Length:

• Standard: 1 meter (customizable upon request)

16. End Type:

• M8 or M10 mounting holes (depending on the design)

17. Control Mode:

• Standard: Polarity reversal via a switch for extending/retracting
• Compatible with external controllers (e.g., relays, remote control systems)

18. Lifespan:

• 40,000+ cycles under rated load conditions

Applications:

• Automotive components (e.g., RVs, adjustable car seats)
• Medical beds and chairs
• Industrial machinery
• Home automation (windows, solar panel tilts, recliners)
• Agricultural equipment (e.g., harvesters, tractors)
• Furniture applications (e.g., standing desks, recliners)

Stroke Length 100MM 7mm/S 1500N DC12V Electric Putter ElectricLinear Actuator
darazsales

Male to Female Jumper Wires for Arduino

Male to Female Jumper Wires is 20pcs 20cm male to female colour breadboard jumper for Arduino
40pcs chromatic colour male to female jump wire
100% brand new

Are you tired of dealing with messy and unreliable wiring in your electronic projects? Look no further! Our Product provide the perfect solution for seamless connectivity, ensuring hassle-free connections every time. Whether you’re a DIY enthusiast, an electronics hobbyist, or a professional engineer, these high-quality jumper wires are a must-have for your toolkit.

Specification:

Length: 20cm
Quantity: a row of 20 roots
1p-1p pin female to male header
Compatible with 2.54mm spacing pin header

Package included:

1 x A row of 40pcs male to female jumper wire

Jumper Wires (Male-Male) for Arduino

Jumper Wires (Female-Female) for Arduino

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Male to Female Jumper Wires for Arduino
Ashen Premathilake

Female – Female Jumper Wires for Arduino

Experience hassle-free connections and unleash the full potential of your electronic projects with our high-quality Female to Female Jumper Wires

• This is 40pcs 20cm female to female color breadboard jumper for Arduino
• 40pcs chromatic color female to female jump wire
• 100% brand new

Specification:

Length: 20cm
Quantity: a row of 20 roots
1p-1p pin female to female header
Compatible with 2.54mm spacing pin headers

Package included:

1 x A row of 20pcs female to female jumper wire

Jumper Wires (Male-Male) for Arduino

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Female to Female Jumper Wires for Arduino
Ashen Premathilake

Male to Male Jumper Wires for Arduino

Experience hassle-free connections and unleash the full potential of your electronic projects with our high-quality Male to Male Jumper Wires

• This is 40pcs 20cm male to male color breadboard jumper for Arduino
• 40pcs chromatic color male to male jump wire
• 100% brand new

Specification:

Length: 20cm
Quantity: a row of 40 roots
1p-1p pin male to male header
Compatible with 2.54mm spacing pin headers

Package included:

1 x A row of 40pcs male to male jumper wire

Jumper Wires (Female-Female) for Arduino

VISIT OUR FACEBOOK PAGE FOR MORE INFO | MORE PRODUCT IN OUR SHOP

Male to Male Jumper Wires for Arduino
Ashen Premathilake