Stoke Length 100MM 20MM/S 450N DC6V-24V Nema17 Stepper Electric Push Rod

Specifications

1. Model: Electric Push Rod Actuator with NEMA17 Stepper Motor
2. Stroke Length: 100mm (customizable on request)
3. Speed: 20mm/s
4. Rated Force (Push/Pull): 450 Newtons (N)
5. Input Voltage: DC6V-24V
6. Motor Type: NEMA17 Stepper Motor
7. Drive Mechanism: Lead screw drive (commonly Trapezoidal Thread)
8. Repeatability: ±0.05mm
9. Mounting Configuration:
   • Front and Rear Clevis (Standard)
   • Optional Mounting Brackets

Mechanical Specifications

1. Actuator Structure:
   • Aluminum Alloy Housing (Lightweight and Corrosion Resistant)
   • Stainless Steel Lead Screw and Push Rod Shaft
2. Step Angle: 1.8° (200 steps per revolution)
3. Lead Screw Pitch: Commonly 2mm or 4mm depending on travel speed and resolution requirements
4. Static Load-Holding: 450N (without power to motor)
5. Duty Cycle: 20-30% (Continuous usage at max load will affect lifespan)
6. Ingress Protection (IP Rating): IP54 (Dust and Light Water Splash Protection)
7. Backlash: ≤ 0.05mm

Electrical Specifications

1. Input Voltage: DC6V to 24V
2. Current per Phase: 1.5A to 2A (Varies by Motor Model)
3. Wiring Configuration: 4-wire Bipolar Stepper Motor
   • Color Coding (Standard): Red, Green, Yellow, Blue
4. Torque (Holding): Approx. 40-60 N·cm (Varies by Stepper Motor Specs)
5. Control Compatibility:
   • Stepper Motor Drivers (e.g., A4988, DRV8825, TMC2209)
   • Microcontrollers (Arduino, Raspberry Pi, PLCs)

Performance Specifications

1. Speed Range: Adjustable via stepper motor driver or pulse signal
2. Resolution: Depends on driver micro-stepping settings
   • Example: 1mm per revolution with 200 steps = 0.005mm per step
3. Acceleration/Deceleration: Programmable via motor driver or controller
4. Noise Level: ≤ 55dB under normal operating conditions

Environmental Conditions

1. Operating Temperature: -10°C to +50°C
2. Storage Temperature: -20°C to +70°C
3. Relative Humidity: 10% to 85% (non-condensing)

Applications

1. Precision Motion Control Applications
2. Automation Equipment
3. Linear Positioning Systems
4. Robotics and CNC Machines
5. Medical Devices
6. Industrial Automation

Stoke Length 100MM 20MM/S 450N DC6V-24V Nema17 Stepper Electric Push Rod
darazsales

Stoke Length 50MM 10MM/S 500N DC6V-24V Nema17 Stepper Electric Push Rod

Specification for Electric Push Rod (Linear Actuator)

1. General Information

• Type: NEMA17 Stepper Motor Integrated Electric Push Rod (Linear Actuator)
• Stroke Length: 50 mm
• Push/Pull Force: 500 N (50 kg)
• Speed: 10 mm/s
• Voltage Input: DC 6V to 24V

2. Stepper Motor Parameters (NEMA 17)

• Motor Type: Bipolar Stepper Motor
• Step Angle: 1.8° (200 steps per revolution)
• Rated Voltage: 6V to 24V (compatible with various drivers)
• Current Per Phase: 1.2A to 2.0A (based on application)
• Holding Torque: Approximately 40 – 45 N·cm
• Phase Resistance: 1.5 to 2.0 ohms
• Inductance: 2.5 to 4.0 mH

3. Linear Actuator Parameters

• Stroke Length: 50 mm
• Push/Pull Force: 500 N (maximum)
• Travel Speed: 10 mm/s (under no load, may vary slightly with load)
• Lead Screw Type: Trapezoidal Thread (e.g., T8x2 or T8x4)
• Screw Lead: 2 mm to 4 mm per revolution
• Backlash: ≤ 0.05 mm
• Self-locking: Yes, due to lead screw design

4. Mechanical Properties

• Material:
  • Push Rod: Stainless Steel or Aluminum Alloy
  • Housing: Anodized Aluminum Alloy
• Maximum Load: 500 N
• Mounting Bracket Options: Front and rear clevis brackets (standard)
• Duty Cycle: 20% (maximum 2 minutes continuous operation within 10 minutes)
• Noise Level: ≤ 55 dB (at 1 meter distance)
• Life Span: 100,000 cycles under rated load

5. Electrical Properties

• Current Draw: Varies with load and voltage (typical range: 1.5A to 3A)
• Drive Type: Microstepping Driver (recommended for smooth operation)
• Control Mode: Step and Direction Signals (pulse-based control)

6. Environmental Specifications

• Operating Temperature: -10°C to 50°C
• Storage Temperature: -20°C to 60°C
• Protection Level: IP54 (standard) / Optional IP65 for dust and water resistance
• Vibration Resistance: Complies with IEC 60068-2-6

7. Applications

• CNC Machines
• Robotics
• Precision Automation Systems
• Adjustable Mechanisms
• Laboratory and Medical Equipment
• Linear Motion Systems

8. Dimensions

• Motor Size: NEMA 17 (42 mm x 42 mm)
• Overall Length: Varies based on stroke and configuration (~150 mm to 200 mm)
• Mounting Interface: 4 x M3 or M4 holes at NEMA 17 faceplate
• Rod Diameter: 8 mm (typical)
• End Connectors:
  • Standard Clevis Mount
  • Threaded Rod End (optional)

Stoke Length 50MM 10MM/S 500N DC6V-24V Nema17 Stepper Electric Push Rod
darazsales

Stroke Length 200MM 7mm/S 1500N DC12V Electric Putter Electric Linear Actuator

Technical Specifications:

1. Input Voltage:
   • DC 12V
2. Stroke Length:
   • 200mm
3. Speed:
   • 7mm/s (no load)
4. Rated Thrust (Force):
   • 1500N (150 kg or approximately 330 lbs)
5. Duty Cycle:
   • 20% (max 2 minutes continuous operation, then rest for 8 minutes)
6. Protection Grade:
   • IP54 (Dust and water-resistant for light splashes)
7. Operating Temperature:
   • -20°C to +65°C
8. Noise Level:
   • ≤ 50 dB
9. Material:
   • Outer casing: Aluminum Alloy
   • Internal components: Steel/Aluminum
10. Mounting Type:

• Front and rear clevis brackets (standard mounting holes)

11. Retracted Length:

• Stroke length (100mm) + ~160mm body length = ~260mm total retracted length

12. Extended Length:

• Retracted length + Stroke (100mm) = ~360mm extended length

13. Rated Current:

• 3A to 5A (depending on load)

14. Load Capacity:

• Capable of operating at full load with 1500N thrust

15. Wire Length:

• Standard: 1 meter (customizable upon request)

16. End Type:

• M8 or M10 mounting holes (depending on the design)

17. Control Mode:

• Standard: Polarity reversal via a switch for extending/retracting
• Compatible with external controllers (e.g., relays, remote control systems)

18. Lifespan:

• 40,000+ cycles under rated load conditions

Applications:

• Automotive components (e.g., RVs, adjustable car seats)
• Medical beds and chairs
• Industrial machinery
• Home automation (windows, solar panel tilts, recliners)
• Agricultural equipment (e.g., harvesters, tractors)
• Furniture applications (e.g., standing desks, recliners)

Stroke Length 200MM 7mm/S 1500N DC12V Electric Putter Electric Linear Actuator
darazsales

Stroke Length 100MM 7mm/S 1500N DC12V Electric Putter ElectricLinear Actuator

Technical Specifications:

1. Input Voltage:
   • DC 12V
2. Stroke Length:
   • 100mm
3. Speed:
   • 7mm/s (no load)
4. Rated Thrust (Force):
   • 1500N (150 kg or approximately 330 lbs)
5. Duty Cycle:
   • 20% (max 2 minutes continuous operation, then rest for 8 minutes)
6. Protection Grade:
   • IP54 (Dust and water-resistant for light splashes)
7. Operating Temperature:
   • -20°C to +65°C
8. Noise Level:
   • ≤ 50 dB
9. Material:
   • Outer casing: Aluminum Alloy
   • Internal components: Steel/Aluminum
10. Mounting Type:

• Front and rear clevis brackets (standard mounting holes)

11. Retracted Length:

• Stroke length (100mm) + ~160mm body length = ~260mm total retracted length

12. Extended Length:

• Retracted length + Stroke (100mm) = ~360mm extended length

13. Rated Current:

• 3A to 5A (depending on load)

14. Load Capacity:

• Capable of operating at full load with 1500N thrust

15. Wire Length:

• Standard: 1 meter (customizable upon request)

16. End Type:

• M8 or M10 mounting holes (depending on the design)

17. Control Mode:

• Standard: Polarity reversal via a switch for extending/retracting
• Compatible with external controllers (e.g., relays, remote control systems)

18. Lifespan:

• 40,000+ cycles under rated load conditions

Applications:

• Automotive components (e.g., RVs, adjustable car seats)
• Medical beds and chairs
• Industrial machinery
• Home automation (windows, solar panel tilts, recliners)
• Agricultural equipment (e.g., harvesters, tractors)
• Furniture applications (e.g., standing desks, recliners)

Stroke Length 100MM 7mm/S 1500N DC12V Electric Putter ElectricLinear Actuator
darazsales